baco website
-
- Posts: 3350
- Joined: Tue Aug 04, 2009 5:25 am
- Location: australia
baco website
has anyone mastered the new site yet?
one of life's pleasures was to peruse their bullet moulds using a logical and obvious system.
how it is now will cost them sales due to no one knowing what they sell.
keep safe,
bruce.
one of life's pleasures was to peruse their bullet moulds using a logical and obvious system.
how it is now will cost them sales due to no one knowing what they sell.
keep safe,
bruce.
ventum est amicus meus
- OLReliable
- Posts: 897
- Joined: Thu Dec 26, 2002 9:42 pm
- Location: Massachusetts
Re: baco website
In my opinion, the new BACO site is a confusing mess.
wyyyyyyy.... iiiyyyyyy ....awwwtttuh
OLR ..... out
OLR ..... out
-
- Posts: 8428
- Joined: Wed Oct 12, 2005 10:28 pm
- Location: Not Far enough NW in Illinois
Re: baco website
It takes a seven year old to find their way through it.
The reason a dog has so many friends is because he wags his tail instead of his tongue.
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
- Don McDowell
- Posts: 7644
- Joined: Thu Nov 29, 2007 2:04 pm
- Location: Ft. Laramie Wy
- Contact:
Re: baco website
It's a work in progress, hopefully the progress quickly. I was wanting to look at some stuff, and couldn't get to it..
AKA Donny Ray Rockslinger
-
- Posts: 67
- Joined: Sun Jan 25, 2004 5:55 am
- Location: Lincoln,Ne.
Re: baco website
The best way is to google what you want,find the buffalo arms link in the responses and click on that.Seems to work better than rooting around on their website!---Mike
-
- Posts: 2774
- Joined: Tue Jun 23, 2009 6:16 pm
Re: baco website
I've noticed a few things that are not on the new site but were on the old one. Hopefully they get it sorted out soon. I liked the old BACO web site, but I'm sure they'll get it all figured out. In the mean time I'll bet they are getting more phone orders
Chris.
Chris.
- Don McDowell
- Posts: 7644
- Joined: Thu Nov 29, 2007 2:04 pm
- Location: Ft. Laramie Wy
- Contact:
Re: baco website
If you click on the category''s and then scroll down to bullet moulds, get the drop box to show Buffalo Arms moulds and then the drop box comes with grease groove or paper patch, click on your choice and then the drop box comes for the diameters, you can find all of the moulds... Takes a bit of fiddling around but they all appear to be there.
AKA Donny Ray Rockslinger
- Lumpy Grits
- Posts: 7680
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: baco website
The older form, was easier to hunt through.
Gary
Gary
"Hav'n you along, is like loose'n two good men"
- alfajim
- Posts: 227
- Joined: Mon Mar 14, 2016 12:16 pm
Re: baco website
I agree with all the above the old site was much better. The new one is confusing and not informative.
The new catalog is great not sure how to cross over to the web site for ordering though other than phone calls.
Jim
The new catalog is great not sure how to cross over to the web site for ordering though other than phone calls.
Jim
-
- Posts: 646
- Joined: Fri Nov 30, 2007 4:00 pm
Re: baco website
why do people constantly fix things that aren't broken i sure can't use it art
- desert deuce
- Posts: 3870
- Joined: Mon Apr 14, 2008 10:51 pm
- Location: Rio Rico, Arizona
Re: baco website
I heard that the goal was to make browsing the BACO site more logical, so therein may lie the problem?
Sometimes you get the chicken, and sometimes you get the feathers!
- Distant Thunder
- Posts: 882
- Joined: Sun Apr 09, 2006 11:46 am
- Location: NE Wisconsin
Re: baco website
Well I'm glad I'm not the only one!
When a guy gets a little older things like this can cause him to think he's slipped over the edge. I spent some time on it recently and could not get anywhere using my tablet. I finally gave up and went elsewhere.
I've no doubt they'll get it fixed and hopefully soon.
DT
When a guy gets a little older things like this can cause him to think he's slipped over the edge. I spent some time on it recently and could not get anywhere using my tablet. I finally gave up and went elsewhere.
I've no doubt they'll get it fixed and hopefully soon.
DT
Jim Kluskens
aka Distant Thunder
aka Distant Thunder
-
- Posts: 14
- Joined: Mon Sep 26, 2011 7:14 am
Re: baco website
Ditto on your comment, Bruce. When it's not broken, don't try and fix it!!!!
- Lumpy Grits
- Posts: 7680
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: baco website
Hopefully, someone will send a link to Dave Gullo about these posts.
G.
G.
"Hav'n you along, is like loose'n two good men"
-
- Posts: 3350
- Joined: Tue Aug 04, 2009 5:25 am
- Location: australia
Re: baco website
well thank god i'm not going mad.
i'm certainly not 7 years old any more, so just can't do it.
one of life's pleasures gone until they fix it.
keep safe, bruce.
i'm certainly not 7 years old any more, so just can't do it.
one of life's pleasures gone until they fix it.
keep safe, bruce.
ventum est amicus meus