Ammo boxes
-
- Posts: 78
- Joined: Sun Mar 03, 2019 6:54 pm
- Location: Dade City, Fl
Re: Ammo boxes
Just ordered from Midway. Holds 50, rim up or down and accepts 3” OAL
Product #: 911703
Manufacturer #: RMLD-50-24
UPC #: 026057228242
Product #: 911703
Manufacturer #: RMLD-50-24
UPC #: 026057228242
-
- Posts: 34
- Joined: Wed Oct 30, 2019 10:57 am
- Location: Pocatello, Idaho
Re: Ammo boxes
I prefer the MTM HL-50 Deluxe Flip Top cases with the nice black latches. Interestingly, the ONLY difference between the large and small caliber boxes is the size of the internal insert, yet the smaller caliber versions are as much as $5 less ($9.99 for the MTM HL-50 RL-24 vs $15.99 for the MTM HL-50 XL-24.) The only problem with the large caliber boxes is that a 45-90 paper patched cartridge will not fit nose up (my preference) and still allow the lid to close. Since the insert is removable, I designed and 3D printed an insert that sits low enough to allow longer (3.7" OAL) cartridges to fit nose up AND short enough that a spent cartridge exceeds the top of the insert so that I can easily remove them individually. I have found that spent cartridges on the large boxes will drop so low that I need to tip the box over to get them out. I just buy the small caliber, much less expensive MTM HL-50 RL-24 and remove and replace the insert with my 3D printed version.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 8428
- Joined: Wed Oct 12, 2005 10:28 pm
- Location: Not Far enough NW in Illinois
Re: Ammo boxes
If you want a good ammo box you almost have to make your own or get a good Woody box.
I gave up with looking for boxes you can sit the shell upright or one deep enough to close the lid. I have a table saw so I just make my own boxes.
I gave up with looking for boxes you can sit the shell upright or one deep enough to close the lid. I have a table saw so I just make my own boxes.
The reason a dog has so many friends is because he wags his tail instead of his tongue.
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
- desert deuce
- Posts: 3902
- Joined: Mon Apr 14, 2008 10:51 pm
- Location: Rio Rico, Arizona
Re: Ammo boxes
Kurt, have you considered setting your shooting activities aside and focus on ammo box creation for the masses?
Sometimes you get the chicken, and sometimes you get the feathers!
-
- Posts: 292
- Joined: Tue Oct 08, 2019 8:42 am
- Location: Wyoming
Re: Ammo boxes
Kurt
I too gave up looking for a stout plastic box that allowed the .45-90 and -110 rounds to stand up and not rattle around. So the table saw came into play as you did. I bored the holes on my mill, makes a hell-ava mess, but worth the effort. The end result with metal hinge, handle and latch is superior. I used Baltic Birch and painted the boxes white to reflect the sun/heat.
kw
I too gave up looking for a stout plastic box that allowed the .45-90 and -110 rounds to stand up and not rattle around. So the table saw came into play as you did. I bored the holes on my mill, makes a hell-ava mess, but worth the effort. The end result with metal hinge, handle and latch is superior. I used Baltic Birch and painted the boxes white to reflect the sun/heat.
kw
-
- Posts: 2777
- Joined: Tue Jun 23, 2009 6:16 pm
Re: Ammo boxes
For wooden boxes, there are also the ones Shiloh sells. Last time I was in Big Timber I stopped in to buy a box that holds 200 rounds. It'll hold any of my .40 or .45 cal rounds base down.
Chris.
Chris.
-
- Posts: 8428
- Joined: Wed Oct 12, 2005 10:28 pm
- Location: Not Far enough NW in Illinois
Re: Ammo boxes
Well I do DD, The boxes are a winter project when the snow is belly deep and ice sickles hang off the mustache. '
The reason a dog has so many friends is because he wags his tail instead of his tongue.
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
-
- Posts: 8428
- Joined: Wed Oct 12, 2005 10:28 pm
- Location: Not Far enough NW in Illinois
Re: Ammo boxes
KW,
Yes I use the mill also for boring the holes in the block.
I change the blocks for the caliber and they won't tip . I also have some memory foam I put under the lid so the cases don't rattle around even if the box tips over the bullets stay put.
Yes I use the mill also for boring the holes in the block.
I change the blocks for the caliber and they won't tip . I also have some memory foam I put under the lid so the cases don't rattle around even if the box tips over the bullets stay put.
The reason a dog has so many friends is because he wags his tail instead of his tongue.
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
-
- Posts: 532
- Joined: Thu Feb 22, 2007 11:28 am
- Location: Southwest Utah
- Contact:
Re: Ammo boxes
SASS Life Member
NRA Life Member....
Which rifle should I shoot today???
NRA Life Member....
Which rifle should I shoot today???
-
- Posts: 14
- Joined: Wed Sep 08, 2021 1:07 pm
Re: Ammo boxes
Now you have me wanting to make my own, in my spare time. Thank You all for the replies
-
- Posts: 1962
- Joined: Sun Jun 03, 2007 10:07 am
- Location: Central Wi
Re: Ammo boxes
cat1870,
Plano site shows "no such thing as model 1230-50
????
beltfed/arnie
Plano site shows "no such thing as model 1230-50
????
beltfed/arnie
-
- Posts: 1962
- Joined: Sun Jun 03, 2007 10:07 am
- Location: Central Wi
Re: Ammo boxes
cat1870,
Plano site shows "no such thing as model 1230-50
????
beltfed/arnie
Plano site shows "no such thing as model 1230-50
????
beltfed/arnie
-
- Posts: 78
- Joined: Wed Mar 25, 2020 12:42 pm
Re: Ammo boxes
I just bought 4 more of the MTM RMLD-15-16T for $8.75 ea., free shipping on fleabay. They hold a 45-70 case base down, and no handle to lure you in to a false sense of security! They will also hold 50-90's nose down.
Steve
Steve
-
- Posts: 2777
- Joined: Tue Jun 23, 2009 6:16 pm
Re: Ammo boxes
If you like plastic there is another option. J&J Products makes 20 round plastic slip cases that are higher quality than the MTM cases. They will hold any .45 cal rounds base down, even a .45-110 with a shallow seated PP bullet. These are what I use when bringing ammo to the range for practice and load testing.
I have a bunch of MTM plastic 50 round boxes that came with a rifle I'd bought ( included 700 rounds of brass all stored in MTM cases!). They hold .45-70 with bases down and are OK, but don't hold ammo with bullets seated out much. Also the part that keeps the lids closed is quite weak. If you pick them up by the handle eventually you'll probably dump that ammo on the ground.
Chris.
I have a bunch of MTM plastic 50 round boxes that came with a rifle I'd bought ( included 700 rounds of brass all stored in MTM cases!). They hold .45-70 with bases down and are OK, but don't hold ammo with bullets seated out much. Also the part that keeps the lids closed is quite weak. If you pick them up by the handle eventually you'll probably dump that ammo on the ground.
Chris.