Getting ready for the upcoming Texas State matches. I believe I’ve got the casting technique pretty well figured out. Now if I can only shoot as well. The 140 bullets are from a BACO JIM410410M1 mould and will be used in a Browning .40-65. I have been using 16:1 alloy for some time but thought I’d try 20:1 for a change to see what happens. Based on a specific gravity test these are actually 21:1.
Wayne
Good casting session today
-
- Posts: 2364
- Joined: Sun Nov 04, 2007 5:29 pm
- Location: Central Texas
- Contact:
Good casting session today
NRA Life (Benefactor & President's Council) Member, TSRA Life Member, NSSF Member, Author & Publisher of the Browning BPCR book
http://www.texas-mac.com
http://www.texas-mac.com
- kenny s
- Posts: 775
- Joined: Sat Nov 07, 2015 8:14 am
- Location: Venice FL
Re: Good casting session today
nice way to break them by weight. where did you get the blocks?
I usually break them up to within .5 grains. .395.5 to .394.0 and then throw out the high and lows figuring air pockets.
I use the BA .408 reduce front band mold. 1 in 16. good molds. have to keep tightening the sprue cutting plate .
Ken
I usually break them up to within .5 grains. .395.5 to .394.0 and then throw out the high and lows figuring air pockets.
I use the BA .408 reduce front band mold. 1 in 16. good molds. have to keep tightening the sprue cutting plate .
Ken
-
- Posts: 2364
- Joined: Sun Nov 04, 2007 5:29 pm
- Location: Central Texas
- Contact:
Re: Good casting session today
Ken,
The sorting tray was made by modifying and gluing 6 of the old design RCBS loading trays to a thin sheet of plywood. RCBS is no longer making this design of loading trays but they can be found on eBay. Each tray had alternating holes with different diameter bottoms, some a little small to handle .40 or .45 caliber bullets. So, using a drill press and a wood bit, I made the diameter of all the holes the same. It works great. I sort all my bullets. I know many would consider that excessive but I enjoy doing it and it gives me confidence in the bullets and my casting technique.
Wayne
NRA Life (Benefactor & President's Council) Member, TSRA Life Member, NSSF Member, Author & Publisher of the Browning BPCR book
http://www.texas-mac.com
http://www.texas-mac.com
-
- Posts: 3350
- Joined: Tue Aug 04, 2009 5:25 am
- Location: australia
Re: Good casting session today
wayne,
if you get any better you will have to buy more loading blocks
it already looks like you had to start coming back down 1 row.
bruce.
if you get any better you will have to buy more loading blocks
it already looks like you had to start coming back down 1 row.
bruce.
ventum est amicus meus
- kenny s
- Posts: 775
- Joined: Sat Nov 07, 2015 8:14 am
- Location: Venice FL
Re: Good casting session today
good idea Wayne and thanks.
I've ordered a few and will glue them together to hold the = and - bullets in a row.
I feel the same. may not be necessary, but I enjoy doing it.
weigh the BP charges too....
Ken
I've ordered a few and will glue them together to hold the = and - bullets in a row.
I feel the same. may not be necessary, but I enjoy doing it.
weigh the BP charges too....
Ken
-
- Posts: 15
- Joined: Fri Feb 05, 2016 11:00 pm
Re: Good casting session today
I like your tray idea. I’ve been thinking of how to handle that differently. How do you like that style of mould handles?
-
- Posts: 2364
- Joined: Sun Nov 04, 2007 5:29 pm
- Location: Central Texas
- Contact:
Re: Good casting session today
There are only two manufacturers of locking mould handles and I really like the aluminum version in the photo which are made by ST Machining. You may be interested in the evaluation of both that I did some time ago: http://www.texas-mac.com/Evaluation_of_ ... oulds.htmlgreen chile wrote: ↑Sun Apr 28, 2019 6:29 am I like your tray idea. I’ve been thinking of how to handle that differently. How do you like that style of mould handles?
Wayne
NRA Life (Benefactor & President's Council) Member, TSRA Life Member, NSSF Member, Author & Publisher of the Browning BPCR book
http://www.texas-mac.com
http://www.texas-mac.com
-
- Posts: 15
- Joined: Fri Feb 05, 2016 11:00 pm
Re: Good casting session today
Thanks Wayne. That was a helpful article. I will try out a set of the aluminum ones.