Reloading 45-2 7/8
- sharps/shooter
- Posts: 1
- Joined: Sun Mar 29, 2020 7:25 pm
- Location: Orangeville IN
Reloading 45-2 7/8
If I have a press that can reload 30-06 do I still need a bigger press for a 45-2 7/8??
Speak softly and carry a big stick
-Ted Roosevelt
-Ted Roosevelt
- Don McDowell
- Posts: 7644
- Joined: Thu Nov 29, 2007 2:04 pm
- Location: Ft. Laramie Wy
- Contact:
Re: Reloading 45-2 7/8
Depends on the press I suppose. I use a RCBS rockchucker and a Redding t7
AKA Donny Ray Rockslinger
-
- Posts: 1517
- Joined: Sun Dec 05, 2004 7:44 pm
- Location: froid, montana
Re: Reloading 45-2 7/8
Sharps/Shooter Send me a PM and maybe I can be of some help. That caliber lends itself to lots of different facts. If you are going to be shooting a Shiloh, I can maybe help you with a pretty basic load that shoots well. I use a Lyman turret press.
Charlie
Charlie
- Don McDowell
- Posts: 7644
- Joined: Thu Nov 29, 2007 2:04 pm
- Location: Ft. Laramie Wy
- Contact:
Re: Reloading 45-2 7/8
No secret sauce for a starter load, 102 grains 1f, .060 fiber wad, 535 gr bullet.
AKA Donny Ray Rockslinger
-
- Posts: 8428
- Joined: Wed Oct 12, 2005 10:28 pm
- Location: Not Far enough NW in Illinois
Re: Reloading 45-2 7/8
If your press is not open enough for that 110 you might look into a C&H H press. It's a 3 station and I used if for loading the .45-120/3.25"
The reason a dog has so many friends is because he wags his tail instead of his tongue.
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
-
- Posts: 1151
- Joined: Mon Oct 28, 2013 1:33 pm
Re: Reloading 45-2 7/8
I use what Don Mc uses
-
- Posts: 525
- Joined: Tue May 19, 2015 9:19 am
Re: Reloading 45-2 7/8
I use a standard RCBS Rockchucker my Dad had many years ago.
-
- Posts: 244
- Joined: Thu Aug 30, 2007 12:35 pm
- Location: High Plains
Re: Reloading 45-2 7/8
I reload 450-400 3 1/4 on my old ('69) Rockchucker.
-
- Posts: 1584
- Joined: Sat Feb 15, 2003 2:03 pm
Re: Reloading 45-2 7/8
The big Lee cast iron press loads all I have, including a .404 Jeffery.
-
- Posts: 166
- Joined: Tue Apr 12, 2005 11:36 pm
Re: Reloading 45-2 7/8
Ditto on the Lee Cast Iron press, I use it for everything from 40-65 to 45-110's.buffalocannon wrote: ↑Wed Apr 08, 2020 11:43 am The big Lee cast iron press loads all I have, including a .404 Jeffery.
Rick
SHCB1
- bpcr shooter
- Posts: 803
- Joined: Sun Feb 04, 2018 5:30 pm
- Location: Madison, Wi
Re: Reloading 45-2 7/8
lee classic cast here as well, loaded over 20k rounds thru it and still going strong. 9mm to PP 45-100
NMLRA Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member