45-110 Lube Cookie Thickness

Talk with other Shiloh Sharps shooters.

Moderators: Kirk, Lucinda

Post Reply
Dave K
Posts: 10
Joined: Mon Oct 14, 2002 12:15 pm
Location: Sundance, WY

45-110 Lube Cookie Thickness

Post by Dave K »

Greetings all!

I am experimenting with loading paper patch bullets for the 45-110 in a 34" barrel Shiloh. I am wondering if the lube cookie can be too thick? I guess my concern is ringing the chamber because of the lube cookie.

I plan on starting with 95 grains of 1F Goex Express, BR2 primers in Norma cases with the lube cookie between a .015" overpowder wad and a .030" wad under the .441 cup based bullet, which is 530 grains, while varying the lube cookie thickness.

I shoot grease groove 45-70, 45-90, 50-70 and 50-90, but have never experimented with PP.

Any help is appreciated!
We will always remember. We will always be proud. We will always be prepared, so we may always be free -- Ronald Reagan, Omaha Beach, June 6, 1984
BFD
Posts: 2789
Joined: Mon Jan 21, 2008 7:36 pm

Re: 45-110 Lube Cookie Thickness

Post by BFD »

The short answer is no. You can't hurt anything, you may not help anything either, but it is safe. If you are just target shooting, you do not NEED a cookie however. It will take up some case space which is often nice for the 110, but it is not necessary or harmful.
Dave K
Posts: 10
Joined: Mon Oct 14, 2002 12:15 pm
Location: Sundance, WY

Re: 45-110 Lube Cookie Thickness

Post by Dave K »

Thanks for the information!

I am experimenting and learning, want to "do no harm" to my rifle!
We will always remember. We will always be proud. We will always be prepared, so we may always be free -- Ronald Reagan, Omaha Beach, June 6, 1984
BFD
Posts: 2789
Joined: Mon Jan 21, 2008 7:36 pm

Re: 45-110 Lube Cookie Thickness

Post by BFD »

You are okay, and experimenting is the surest way to learn.

Good luck!
MSalyards
Posts: 270
Joined: Wed Feb 14, 2018 4:18 pm
Location: Nine Mile Falls Wa

Re: 45-110 Lube Cookie Thickness

Post by MSalyards »

I started a few years ago with the 45/70. At that time Kirk told me 3/16 grease wad for my hunting loads. I just started shooting the 45/110 PP a month ago and was told by 2 different guys 2 different thicknesses , The 500 gr load was 3/16 and the 565 gr load was 3/8.
BFD
Posts: 2789
Joined: Mon Jan 21, 2008 7:36 pm

Re: 45-110 Lube Cookie Thickness

Post by BFD »

There is no "correct" thickness for any particular bullet or rifle, just what you find works. But if you are going to shoot accurately, expect to wipe between shots. Lube cookies will only make a minimal difference in shooting with paper patches. It all depends on your goals.
bobw
Posts: 3855
Joined: Tue Nov 23, 2004 12:52 pm

Re: 45-110 Lube Cookie Thickness

Post by bobw »

The original Sharps loading instructions called for a 3/16" lube wad.use 105 grs Fg' seat a .026" card wad over the powder and do compression. insert the lube wad and put your .030" on top just snugged down you should have 1/8 -3/16" space to seat your bullet. You don't buy a 45-2 7/8" to load down to 45-90 loads.???? Bobw
bobw
BFD
Posts: 2789
Joined: Mon Jan 21, 2008 7:36 pm

Re: 45-110 Lube Cookie Thickness

Post by BFD »

Heck bob, I get 107 gr in my .45-100 as a minimum load (albeit w/o cookie). Seems like downloading the 110 is almost universal. :)

Damn sexy cartridge however...
Kenny Wasserburger
Posts: 4733
Joined: Tue Sep 24, 2002 3:53 pm
Location: Gillette, Wyoming

Re: 45-110 Lube Cookie Thickness

Post by Kenny Wasserburger »

I have used lube cookies with 104 grs of FG Goex Express, 3/8 of an inch thick of black Magic Lube in my 45-110 with good results, 4 dead buffalo. :D

Accuracy was good for up to 16 consecutive shots, it’s no target load but is a great hunting load.


KW

The Lunger.
We'll raise up our Glasses against Evil Forces, Singing, Whiskey for my men, Beer for my horses.

Wyoming Territory Sharps Shooter
Post Reply