Chop-saw to trim long brass?
-
- Posts: 3236
- Joined: Thu Apr 14, 2005 8:26 pm
- Location: WA State
Chop-saw to trim long brass?
I remember reading here months ago of a shooter here buying a chop-saw from Harbor Freight for trimming 3 1/4” brass to 2 7/8”, etc. quickly and effectively. I can’t find that thread. I’ll be doing this. What are you using to ‘hold’ the brass with while cutting? Can you post a photo of the jig you were using, and the exact chop-saw you bought at Harbor Freight?
Thanks,
Robert
Thanks,
Robert
Beware of the man that owns one rifle.
-
- Posts: 1517
- Joined: Sun Jul 04, 2010 8:55 am
- Location: GA.
Re: Chop-saw to trim long brass?
It might have been me, I don't know if it was or not. I have a Drill Master chop saw that has the jig built onto the saw. It is a mini cut off saw item# 42307.
Normal isn't coming back, but Jesus is.
-
- Posts: 1517
- Joined: Sun Jul 04, 2010 8:55 am
- Location: GA.
Re: Chop-saw to trim long brass?
Harbor freight $40 and I guess add shipping. E-bay 45 to 50 free shipping.
Normal isn't coming back, but Jesus is.
-
- Posts: 525
- Joined: Tue May 19, 2015 9:19 am
Re: Chop-saw to trim long brass?
Coltsmoke - thanks for the reference. I just ordered one to cut the same thing: 3 1/4 to 2 7/8 Norma brass
-
- Posts: 3236
- Joined: Thu Apr 14, 2005 8:26 pm
- Location: WA State
Re: Chop-saw to trim long brass?
I went to Harbor Freight and bought this chop saw. It’s #61204, and looks real good. Built-in jig.
Thanks all,
Robert
Thanks all,
Robert
Beware of the man that owns one rifle.
-
- Posts: 3858
- Joined: Tue Nov 23, 2004 12:52 pm
-
- Posts: 289
- Joined: Tue Oct 08, 2019 8:42 am
- Location: Wyoming
Re: Chop-saw to trim long brass?
Make a wood cradle to hold the brass case, 3/4 square with a 1/2 round groove in it. Just trimmed 100 Norma 45 basic cases.
kw
kw
-
- Posts: 3236
- Joined: Thu Apr 14, 2005 8:26 pm
- Location: WA State
Re: Chop-saw to trim long brass?
Thank you, sounds easy. Much appreciated.
Robert
Beware of the man that owns one rifle.
-
- Posts: 258
- Joined: Mon Aug 11, 2003 4:03 pm
- Location: Virginia
Re: Chop-saw to trim long brass?
Here is a short video I made showing the fixture I use in the HF mini chop saw. I make them for various case sizes as I need them.
https://youtu.be/7unEiiPN860
https://youtu.be/7unEiiPN860
Never trust a man who wears both suspenders AND a belt.
-
- Posts: 3236
- Joined: Thu Apr 14, 2005 8:26 pm
- Location: WA State
Re: Chop-saw to trim long brass?
Thank you, Steve. That’s a great instructional video. After seeing it I retuned the chop saw I bought today at Harbor Freight, then went on Amazon and bought the same saw you show, and three extra cutting wheels.
Thank you!
Robert
Thank you!
Robert
Beware of the man that owns one rifle.
-
- Posts: 166
- Joined: Tue Apr 12, 2005 11:36 pm
Re: Chop-saw to trim long brass?
The Drill Master and the Harbor Freight are the same saw I believe. My harbor freight came with a jig when I bought it. One tip is to run the teeth on the blade into a bar of soap every so often. It makes for easier cuts, you can feel the difference. I am still on my same blade and have used it for a lot of years now. I do have a spare drive belt but have never used it either.
SHCB1
-
- Posts: 3236
- Joined: Thu Apr 14, 2005 8:26 pm
- Location: WA State
- CaptnJack
- Posts: 113
- Joined: Wed Jan 28, 2015 7:12 am
- Location: SE.Indiana
- Contact:
Re: Chop-saw to trim long brass?
I bought one from HF to trim over 200 basic brass for my 45-110 . The tool works ok but the cutting wheel is junk it would not cut the brass so I removed the wheel and installed a 3" thin 3-M cutting wheel I had on it, it worked fine after that >you have to also remove the wheel safety guard for the 3" wheel yo fit.
-
- Posts: 3236
- Joined: Thu Apr 14, 2005 8:26 pm
- Location: WA State
Re: Chop-saw to trim long brass?
Great, and thanks for this. Can you give me some info on the item # of these 3” blade your talking about so that I can order these, please? Where did you buy them?CaptnJack wrote: ↑Sun Jun 27, 2021 8:46 am I bought one from HF to trim over 200 basic brass for my 45-110 . The tool works ok but the cutting wheel is junk it would not cut the brass so I removed the wheel and installed a 3" thin 3-M cutting wheel I had on it, it worked fine after that >you have to also remove the wheel safety guard for the 3" wheel yo fit.
Thanks,
Robert
Beware of the man that owns one rifle.