circular ejector for 1902 Roller in 30-40 Krag

Talk with other Shiloh Sharps shooters.

Moderators: Kirk, Lucinda

Post Reply
mdeland
Posts: 11708
Joined: Mon Nov 20, 2006 1:47 pm

circular ejector for 1902 Roller in 30-40 Krag

Post by mdeland »

I'm re-barreling a 1902 Rolling block in 30-40 Krag with the circular ejector and need to know if there is an ejector for the cartridge or does one modify the 7mm Mauser to do the job? I made one from scratch one time in 45-70 and it was quite a project so would prefer to get the correct one for the cartridge or modify an existing one if possible.
Any help would be appreciated, thank you.
User avatar
bpcr shooter
Posts: 800
Joined: Sun Feb 04, 2018 5:30 pm
Location: Madison, Wi

Re: circular ejector for 1902 Roller in 30-40 Krag

Post by bpcr shooter »

I would call Ken and see....http://www.rollingblockparts.com/



matt
NMLRA Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
mdeland
Posts: 11708
Joined: Mon Nov 20, 2006 1:47 pm

Re: circular ejector for 1902 Roller in 30-40 Krag

Post by mdeland »

Thanks Matt, very helpful. I had the address at one time but couldn't put my hands on it last night.
mdeland
Posts: 11708
Joined: Mon Nov 20, 2006 1:47 pm

Re: circular ejector for 1902 Roller in 30-40 Krag

Post by mdeland »

Well the word is that the 7mm extractors need to be welded up and modified for the 30-40 case so that is the route I will take. I'll keep posting some pictures so others in the same boat can watch this develop and give some suggestions or find something they can use.
Ain't nothing in gun work that I can readily think of that is very often easy ! :lol:
Post Reply