Other than Buffalo Arms and Track of the Wolf, who might carry 45 Basic brass?
Thanks!
45 Basic Brass
-
- Posts: 98
- Joined: Thu Jul 29, 2021 1:49 pm
- Location: Texas
Re: 45 Basic Brass
I learned some more. Initially, I thought 45 Basic was full length brass (3 1/4"), that you just cut to your desired length. Then, I was told 45 Basic was 2.9" long, and the correct brass for the 45-110. Apparently, not so. I found 3 different brass listed as 45 Basic, and is also listed as being 3 1/4" long. The brands are RCBS, Taylor Nonte, and brass marked C Christian Arms.
Isn't life fun?
Isn't life fun?
Last edited by Chickm1 on Sat Oct 02, 2021 8:38 am, edited 4 times in total.
-
- Posts: 780
- Joined: Wed Jun 01, 2005 8:51 pm
- Location: Patton State Hospital
Re: 45 Basic Brass
There is also "Norma", the best. It is/was offered in both lengths of 3-1/4" (marked .45-120) and 2.9.
Dennis
Dennis
"40 knots, no smoke"
"By God Woodrow; it’s been quite a party ain’t it?”
"By God Woodrow; it’s been quite a party ain’t it?”
-
- Posts: 98
- Joined: Thu Jul 29, 2021 1:49 pm
- Location: Texas
Re: 45 Basic Brass
Yeah, I bought a pile of it marked 45-120, out of my own ignorance. Then I found out if I cut it to 2 7/8", the case wall will be too thick to accept a greaser, and I am not ready to start paper patching
-
- Posts: 1962
- Joined: Sun Jun 03, 2007 10:07 am
- Location: Central Wi
Re: 45 Basic Brass
Chickm1
You could cut off that 45-120 brass, and then outside neck turn to bring down the wall thickness
so you could use it for the GGs.
Additionally, Neck turning is Great for making the neck thicknesses very concentric.
OTOH, go to bore diameter PP bullets
beltfed/arnie
You could cut off that 45-120 brass, and then outside neck turn to bring down the wall thickness
so you could use it for the GGs.
Additionally, Neck turning is Great for making the neck thicknesses very concentric.
OTOH, go to bore diameter PP bullets
beltfed/arnie
- powderburner
- Posts: 2987
- Joined: Sat May 24, 2003 12:23 am
- Location: elko nv.
Re: 45 Basic Brass
Norma 45 -120 basic is 3&1/4
Norma basic is 2.9
The rcbs is 3&1/4
Dont know about the other.
I have some 45-120 norma cut down and it works in my standard chamber rifle. Also have older rcbs the only needed cutting down to fit.
Normas 2.9 is the easiest to deal with. Just full length size and trim a small bit to fit your chamber.
Norma basic is 2.9
The rcbs is 3&1/4
Dont know about the other.
I have some 45-120 norma cut down and it works in my standard chamber rifle. Also have older rcbs the only needed cutting down to fit.
Normas 2.9 is the easiest to deal with. Just full length size and trim a small bit to fit your chamber.
Dean Becker
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T