Shiloh's "Victory Mould"

Matthew_Q · Post by **Matthew_Q** » Wed Nov 24, 2004 11:38 am

Keith,

thanks for the advice, I'll jot that down in my notes somewhere and try to remember it.

Was it you I asked about possibly getting a little hands on instruction for casting? If you're gonna do some casting some weekend soon, let me know, I'll pick up some lead and come learn a little and make some bullets, if you'll have me.

KHR · Post by **KHR** » Mon Nov 29, 2004 12:17 pm

matt
I'll be casting in a couple of weeks and will message you beforehand

keith

Matthew_Q · Post by **Matthew_Q** » Tue Nov 30, 2004 9:44 am

KHR, cool, I'll try to order some lead with this paycheck. Thanks!

ALLAGASH · Post by **ALLAGASH** » Wed Dec 08, 2004 11:59 am

I just got my new mold from Victory Molds. (550 grain tapered PP, cupped base)

Steve Fotou is a great guy to work with and he turns out a great product.

I contacted several other custom mold makers before running across victory Molds only to be told that they were too busy or were not taking anymore orders.

I have not tried any of Steve's standard mold offerings but if its of the quality of this one then I would have no hesitation dropping the bucks for it.

John Boy · Post by **John Boy** » Wed Sep 02, 2020 2:45 pm

Old Post ... I'm interested to buy the Victory Pedersoli Gunn Trenk mold
If one is for sale - send me a PM
Thanks

beltfed · Post by **beltfed** » Wed Sep 02, 2020 4:23 pm

John Boy,
Back then, I was one of the guys who "borrowed" the "PGT" mold that was being passed around.
Actually, nothing special.
My Lyman Postell shot just as well from my Brg BPCR 45-70
Better to Advance to a DDEPP mold such as the BACO JIM453545E or the JIM455545E
The Baco molds are Excellent Quality.
beltfed/arnie

powderburner · Post by **powderburner** » Wed Sep 02, 2020 5:49 pm

Fotou went out of business quite a few years ago and moved To the coast. Last i heard
from him he was building levoleour blinds.

bruce m · Post by **bruce m** » Wed Sep 02, 2020 9:12 pm

what arnie said.
ddpp bullets are the future .
bruce.

bpcr shooter · Post by **bpcr shooter** » Thu Sep 03, 2020 8:23 am

I will also second Arnie's remarks....... The DDEPP bullets are performing VERY well, even in the Italian guns

Matt

bruce m · Post by **bruce m** » Fri Sep 04, 2020 3:12 pm

there is a drawing of the pedersoli/gunn/trenk mould on bpcr website if you need measurements to get a custom mould made.
on the same page are a number of articles by dan theodore as well as dick trenk.
one of the reasons dd pp bullets work well is that you measure fired cases, bore diameter, and freebore if any, and design the mould around that.
this is what should be done with any mould, but people seem not to want to go to the trouble.
the pgt mould was specifically designed for the pedersoli chamber.
bruce.

desert deuce · Post by **desert deuce** » Fri Sep 04, 2020 4:41 pm

what arnie said.
ddpp bullets are the future .
bruce.

OMG, going to ebay right away and put my Jones, Brooks, Mos, BACO, NEI, Ideal and Lyman Moulds up for sale, rifles to Gun Broker. Joe Biden just said the same thing about the Democrat Party and I see a confluence of insanity on the horizon.

bruce m · Post by **bruce m** » Sun Sep 06, 2020 9:30 pm

zack,
no Kal on your list.
he made my ddeppp moulds and did a good job.
bruce.

Shiloh Rifle Forums

Shiloh's "Victory Mould"

victory molds

Re: Shiloh's "Victory Mould"

Re: Shiloh's "Victory Mould"

Re: Shiloh's "Victory Mould"

Re: Shiloh's "Victory Mould"

Re: Shiloh's "Victory Mould"

Re: Shiloh's "Victory Mould"

Re: Shiloh's "Victory Mould"

Re: Shiloh's "Victory Mould"