10.34 base spacing location

Ask Shiloh questions about your Shiloh Sharps Rifle.

Moderators: Kirk, Lucinda

Post Reply
bohemianway
Posts: 35
Joined: Fri Jan 18, 2019 3:58 pm

10.34 base spacing location

Post by bohemianway » Tue Oct 26, 2021 7:45 pm

I am considering D&Ting my new to me (SN 7670B) 15.6lb 30inch for a scope (7.2" spacing would put the front base right on the "Shiloh" stamp). Is there a drawing for the factory hole locations from the front of the action?

Thank you,
Charles

Kirk
Moderator
Posts: 2085
Joined: Fri Sep 20, 2002 7:47 pm
Location: Big Timber

Re: 10.34 base spacing location

Post by Kirk » Wed Oct 27, 2021 5:38 am

You want the rear as far back as you can due to your eye relief. I'm sorry, but it's gonna hit the stamp.

User avatar
Luke
Posts: 186
Joined: Tue Sep 24, 2002 12:26 pm
Location: Central Missouri

Re: 10.34 base spacing location

Post by Luke » Wed Oct 27, 2021 6:10 am

I have the 7.2 spacing (MVA B5 scope) and the mounts don't cover any markings, fwiw.
Limber Up!

User avatar
Luke
Posts: 186
Joined: Tue Sep 24, 2002 12:26 pm
Location: Central Missouri

Re: 10.34 base spacing location

Post by Luke » Wed Oct 27, 2021 6:18 am

Then again, I had it d&t when built, maybe the stamps were moved to accommodate?
Limber Up!

Post Reply