.45-110 brass?

Ask Shiloh questions about your Shiloh Sharps Rifle.

Moderators: Kirk, Lucinda

SFogler
Posts: 275
Joined: Tue May 19, 2015 9:19 am

Re: .45-110 brass?

Post by SFogler » Sun Mar 10, 2019 10:34 pm

Just shot some of my new Norma brass at the Ben Avery match. I am very happy with it. I'll have to trim a tiny bit off the end of the 2.88 but it holds the most powder and did better than my stretched Starline or the Jamison.

Williamsmattc
Posts: 16
Joined: Thu Mar 21, 2019 10:29 am

Re: .45-110 brass?

Post by Williamsmattc » Sun Jun 16, 2019 2:59 pm

Buffalo Arms has Norma .45-110 brass in stock right now! It’s the 2.9” trim to length, not the stretched brass.

User avatar
losttrail
Posts: 310
Joined: Tue Jul 17, 2012 11:21 am
Location: CO

Re: .45-110 brass?

Post by losttrail » Wed Jul 24, 2019 3:27 pm

I see that Huntington has .45-120 on sale right now for $29.98 for 20.

Even though I'm roughly 18 months out from getting my Quigley, I'm going to start stocking up. Thinking of buying some of these and trimming.

Aha, just found the .45-2.88 on Huntington for $40.98/20.

http://www.huntingtons.com/store/produc ... 271&page=5
“That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It our job to see that it stays there.” - George Orwell
NRA Life Member
RMEF member
Army Veteran, Tank Commander

Dennis Armistead
Posts: 173
Joined: Thu Aug 20, 2015 5:09 pm
Location: Payson Arizona
Contact:

Re: .45-110 brass?

Post by Dennis Armistead » Wed Jul 24, 2019 4:39 pm

losttrail wrote:
Wed Jul 24, 2019 3:27 pm
I see that Huntington has .45-120 on sale right now for $29.98 for 20.

Even though I'm roughly 18 months out from getting my Quigley, I'm going to start stocking up. Thinking of buying some of these and trimming.

Aha, just found the .45-2.88 on Huntington for $40.98/20.

http://www.huntingtons.com/store/produc ... 271&page=5
I wouldn't trim till you do a chamber cast. If you do it will probably be to short.
Dennis
Experience trumps intelligence every time.

User avatar
losttrail
Posts: 310
Joined: Tue Jul 17, 2012 11:21 am
Location: CO

Re: .45-110 brass?

Post by losttrail » Thu Jul 25, 2019 6:10 am

Dennis Armistead wrote:
Wed Jul 24, 2019 4:39 pm
losttrail wrote:
Wed Jul 24, 2019 3:27 pm
I see that Huntington has .45-120 on sale right now for $29.98 for 20.

Even though I'm roughly 18 months out from getting my Quigley, I'm going to start stocking up. Thinking of buying some of these and trimming.

Aha, just found the .45-2.88 on Huntington for $40.98/20.

http://www.huntingtons.com/store/produc ... 271&page=5
I wouldn't trim till you do a chamber cast. If you do it will probably be to short.
Dennis
Thanks Dennis.
I planned on getting the .45-120 brass and just wait until I get the rifle to do anything with it. Chamber cast is in the plan.
“That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It our job to see that it stays there.” - George Orwell
NRA Life Member
RMEF member
Army Veteran, Tank Commander

User avatar
losttrail
Posts: 310
Joined: Tue Jul 17, 2012 11:21 am
Location: CO

Re: .45-110 brass?

Post by losttrail » Thu Jul 25, 2019 9:12 am

Just ordered 100 cases of 45 3-1/4 (120) from Huntington's at $29.98/20. Will keep this site on my radar and order more and more as time goes by.

Will just let them sit until I get my Q and ensure proper chamber length.

Now the educating myself on PP loading begins.
“That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It our job to see that it stays there.” - George Orwell
NRA Life Member
RMEF member
Army Veteran, Tank Commander

buffalocannon
Posts: 1522
Joined: Sat Feb 15, 2003 2:03 pm

Re: .45-110 brass?

Post by buffalocannon » Fri Jul 26, 2019 11:43 am

Been using the BA .45-100 brass stretched from .348 WCF for 20 years.

MSalyards
Posts: 47
Joined: Wed Feb 14, 2018 4:18 pm
Location: Nine Mile Falls Wa

Re: .45-110 brass?

Post by MSalyards » Sat Jul 27, 2019 12:29 pm

Just call and ask Kirk. He will start you out right.

Post Reply