Page 2 of 2

Re: .45-110 brass?

Posted: Sun Mar 10, 2019 10:34 pm
by SFogler
Just shot some of my new Norma brass at the Ben Avery match. I am very happy with it. I'll have to trim a tiny bit off the end of the 2.88 but it holds the most powder and did better than my stretched Starline or the Jamison.

Re: .45-110 brass?

Posted: Sun Jun 16, 2019 2:59 pm
by Williamsmattc
Buffalo Arms has Norma .45-110 brass in stock right now! It’s the 2.9” trim to length, not the stretched brass.

Re: .45-110 brass?

Posted: Wed Jul 24, 2019 3:27 pm
by losttrail
I see that Huntington has .45-120 on sale right now for $29.98 for 20.

Even though I'm roughly 18 months out from getting my Quigley, I'm going to start stocking up. Thinking of buying some of these and trimming.

Aha, just found the .45-2.88 on Huntington for $40.98/20.

http://www.huntingtons.com/store/produc ... 271&page=5

Re: .45-110 brass?

Posted: Wed Jul 24, 2019 4:39 pm
by Dennis Armistead
losttrail wrote: Wed Jul 24, 2019 3:27 pm I see that Huntington has .45-120 on sale right now for $29.98 for 20.

Even though I'm roughly 18 months out from getting my Quigley, I'm going to start stocking up. Thinking of buying some of these and trimming.

Aha, just found the .45-2.88 on Huntington for $40.98/20.

http://www.huntingtons.com/store/produc ... 271&page=5
I wouldn't trim till you do a chamber cast. If you do it will probably be to short.
Dennis

Re: .45-110 brass?

Posted: Thu Jul 25, 2019 6:10 am
by losttrail
Dennis Armistead wrote: Wed Jul 24, 2019 4:39 pm
losttrail wrote: Wed Jul 24, 2019 3:27 pm I see that Huntington has .45-120 on sale right now for $29.98 for 20.

Even though I'm roughly 18 months out from getting my Quigley, I'm going to start stocking up. Thinking of buying some of these and trimming.

Aha, just found the .45-2.88 on Huntington for $40.98/20.

http://www.huntingtons.com/store/produc ... 271&page=5
I wouldn't trim till you do a chamber cast. If you do it will probably be to short.
Dennis
Thanks Dennis.
I planned on getting the .45-120 brass and just wait until I get the rifle to do anything with it. Chamber cast is in the plan.

Re: .45-110 brass?

Posted: Thu Jul 25, 2019 9:12 am
by losttrail
Just ordered 100 cases of 45 3-1/4 (120) from Huntington's at $29.98/20. Will keep this site on my radar and order more and more as time goes by.

Will just let them sit until I get my Q and ensure proper chamber length.

Now the educating myself on PP loading begins.

Re: .45-110 brass?

Posted: Fri Jul 26, 2019 11:43 am
by buffalocannon
Been using the BA .45-100 brass stretched from .348 WCF for 20 years.

Re: .45-110 brass?

Posted: Sat Jul 27, 2019 12:29 pm
by MSalyards
Just call and ask Kirk. He will start you out right.