bullet stabilization
-
- Posts: 11
- Joined: Tue Nov 13, 2018 7:04 pm
bullet stabilization
I have a 45/120 34". I wanted to ask before ordering a couple of casting molds if the rifle will stabilize bullets weighing between 300 and 405 grains ? Thank you
-
- Posts: 1610
- Joined: Thu Oct 26, 2006 1:20 pm
Re: bullet stabilization
Unless you are trying to develop an express hunting load with BP, I'd suggest going to heavier bullets, 500+ grains. Standard ROT for these .45's is 1:18, which will stabilize such bullets perfectly.
-
- Posts: 80
- Joined: Sat Oct 10, 2015 8:42 am
- Location: Colorado
Re: bullet stabilization
Older Shilohs had 1 in 20 twist so it helps to know what you have. A 450 to 500 grain is a good blind guess.
There’s no horse so dead it can’t be beat a bit more.
-
- Posts: 584
- Joined: Tue Apr 26, 2005 6:19 am
- Location: Tallahassee, Fl
Re: bullet stabilization
Plus it should stabilize the shorter bullets alsomartinibelgian wrote: ↑Sun Aug 11, 2019 4:44 am Unless you are trying to develop an express hunting load with BP, I'd suggest going to heavier bullets, 500+ grains. Standard ROT for these .45's is 1:18, which will stabilize such bullets perfectly.
Real gun powder is black.
- powderburner
- Posts: 2990
- Joined: Sat May 24, 2003 12:23 am
- Location: elko nv.
Re: bullet stabilization
The only problem with really light bullets and all that horsepower is the bullet has a tendency to strip the rifling.
Dean Becker
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T
-
- Posts: 11
- Joined: Tue Nov 13, 2018 7:04 pm
Re: bullet stabilization
Rifle was ordered in 1990 and I received it in 1993.
-
- Posts: 3350
- Joined: Tue Aug 04, 2009 5:25 am
- Location: australia
Re: bullet stabilization
those bullets will be stable in a 16, 18, and 20 twist barrels.
your 45x 3 1/4 is very similar to british express rifles, and they went down to under 300 gns.
bruce.
your 45x 3 1/4 is very similar to british express rifles, and they went down to under 300 gns.
bruce.
ventum est amicus meus
-
- Posts: 8428
- Joined: Wed Oct 12, 2005 10:28 pm
- Location: Not Far enough NW in Illinois
Re: bullet stabilization
I had a .45-3.25 and shot 300 grain swaged PP bullets for it. Powder burner is right they will strip at the velocity with that powder load of the 3-1/4 case full. I patched them to groove and used almost a straight WW alloy or monotype added to lead. They shot well patched to groove but tumbled patched to bore.
The reason a dog has so many friends is because he wags his tail instead of his tongue.
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
-
- Posts: 11
- Joined: Tue Nov 13, 2018 7:04 pm
Re: bullet stabilization
Thanks everyone for the replies.