Caliber or length?ksbreed123 wrote:lumpy grits, i shoot starline brass
You will need to anneal the case mouth before loading.
G.
sights
-
Lumpy Grits
- Posts: 7677
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: sights
You will need to anneal the case mouth before loading.
G.
"Hav'n you along, is like loose'n two good men"
-
mdeland
- Posts: 11708
- Joined: Mon Nov 20, 2006 1:47 pm
Re: sights
Reading the new sight post reminded me of the early days when my shop calipers were Vernier scaled before I could afford a dial unit. This was long before digital calipers and I still have them here some where. They worked perfectly and were practically indestructible.
I have always used calipers ten times more than a mic when machining as they are accurate enough for most application and far faster to work.
The scale is far more handy for sight regulation than would be reading thousands directly.
I have always used calipers ten times more than a mic when machining as they are accurate enough for most application and far faster to work.
The scale is far more handy for sight regulation than would be reading thousands directly.
-
Lumpy Grits
- Posts: 7677
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: sights
How's about a digital Soule Sight 
Wouldn't that have the ODG's flip-flop'n in their graves.........
G.
Wouldn't that have the ODG's flip-flop'n in their graves.........
G.
"Hav'n you along, is like loose'n two good men"
-
mdeland
- Posts: 11708
- Joined: Mon Nov 20, 2006 1:47 pm
Re: sights
Solar powered digital soule!!! Oh my!!!
-
Lumpy Grits
- Posts: 7677
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: sights
Get to it then......... 
Where will you put the solar panel 
G.
Where will you put the solar panel
G.
"Hav'n you along, is like loose'n two good men"
-
77 sharps
- Posts: 331
- Joined: Thu Nov 11, 2010 9:45 pm
- Location: N. CA
Re: sights
Don't ya know? The panel goes on the beanie hat. Just remove the propeller.
-
Lumpy Grits
- Posts: 7677
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: sights
Really 
The ones I have seen, are screwed onto the barrel.
G.
The ones I have seen, are screwed onto the barrel.
G.
"Hav'n you along, is like loose'n two good men"
-
ksbreed123
- Posts: 119
- Joined: Sat Mar 04, 2006 7:29 am
Re: sights
finally after all the info i came up with my rear sight is a #7 sharps long range from mva.it matches all the info and the pic on mva.its just nice to know what i got
-
ksbreed123
- Posts: 119
- Joined: Sat Mar 04, 2006 7:29 am
Re: sights
correction...its a #107 sharps long range