Mucking around with groove dia. PP and some Polish powder

Discussions of powders, bullets and loading information.

Moderators: Kirk, Lucinda

User avatar
desert deuce
Posts: 3845
Joined: Mon Apr 14, 2008 10:51 pm
Location: Rio Rico, Arizona

Re: Mucking around with groove dia. PP and some Polish powder

Post by desert deuce »

Dear Mr Taylor,

We unfortunately don't have a distributor in the US.
We are currently looking for a distributor.

Kind regards
--
Jarosław Kotzbach
Proxy / Sales Director
  
Prochemist Sp. z o.o.
Rynek 1
57-250 Złoty Stok
POLAND
NIP 887-18-04-817
Kapitał Zakładowy 100.000 zł KRS 0000420055
IX Wydział Gospodarczy Sąd Rejonowy dla Wrocławia Fabrycznej
 
tel./fax: +48 52 348 25 25
www.zlotystok.com
www.blackpowder.eu
www.explosives.pl
Sometimes you get the chicken, and sometimes you get the feathers!
martinibelgian
Posts: 1610
Joined: Thu Oct 26, 2006 1:20 pm

Re: Mucking around with groove dia. PP and some Polish powder

Post by martinibelgian »

Here last target referred to - the only changes were the use of HDPE wads and seating the bullet a bit deeper, in order to reduce the strain on my thumb when loading.
Interestingly, the low 9 I 'felt' when loading the cartridge - it had quite a bit less resistance than the other cartridges...
Image

Still, it got me a 100 with 11 shots, shooting prone, with sling, no support. I did give the rear sigh a cat's hair to the left in order to try and center the impacts after the 1st few shots :)
Post Reply