AZ ShrpShtr Cartridge Loading Tool(s)

Discussions of powders, bullets and loading information.

Moderators: Kirk, Lucinda

CO
Posts: 353
Joined: Fri Nov 05, 2010 12:50 pm
Location: georgia

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by CO »

I didn't say I could shoot. I said I could load proper ammo.
CO
Posts: 353
Joined: Fri Nov 05, 2010 12:50 pm
Location: georgia

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by CO »

I didn't say I could shoot. I said I could load proper ammo.
SSShooter
Posts: 2910
Joined: Mon Feb 20, 2012 7:06 am
Location: Jersey Shore

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by SSShooter »

Time to "bring this back". No word on AZ Sharpshooters so I've started making a similar loading tool. Have made three (3) for a Hepburn (which I shoot so was first :wink:) and starting a run of a dozen for the High Wall (lot more High Wall shooters). Once I can find one of the tools for the 1874 Sharps I'll make a run of them, as well.

Charles - you should get one of each. Am sure just owning them will help you shoot better with your properly loaded ammo. :wink:
Glenn
User avatar
desert deuce
Posts: 3842
Joined: Mon Apr 14, 2008 10:51 pm
Location: Rio Rico, Arizona

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by desert deuce »

I call them a breech seater AND you don't need one until you need one. And that usually happens in a match when you don't have time to fool around with seating the cartridge that last sixteenth inch so you can close the breech and fire the shot expeditiously because the clock is running and tells you that there is 15 seconds left. :shock: I have not reason to believe improper loading of ammunition has been the problem, more like snit happens!

Have an idea on a price yet? Using the Borchardt rifle right now so it will probably be October/November before I can turn that seater loose.
Sometimes you get the chicken, and sometimes you get the feathers!
SSShooter
Posts: 2910
Joined: Mon Feb 20, 2012 7:06 am
Location: Jersey Shore

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by SSShooter »

That would be great. Had not thought of the Borchardt. Like the Hepburn, not many out there, so will make up a 'few'. Like you say, they are useless until you need one........ then they are indispensable.
Glenn
SSShooter
Posts: 2910
Joined: Mon Feb 20, 2012 7:06 am
Location: Jersey Shore

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by SSShooter »

OK........... have a dozen 1885 High Wall and three Rem-Hepburn finished.

1874 Sharps is next.
You do not have the required permissions to view the files attached to this post.
Glenn
User avatar
Lumpy Grits
Posts: 7673
Joined: Tue Jan 28, 2003 7:58 pm
Location: Springfield, Missouri-U.S.A. Earth

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by Lumpy Grits »

Am I seeing a crack in the bend of the top one? :?
Gary
"Hav'n you along, is like loose'n two good men"
stevewhr
Posts: 113
Joined: Thu Jan 30, 2014 10:15 am
Location: Cheyenne, Wyoming

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by stevewhr »

Glen, I'd like one for a scoped hi wall. Pm me the address and I'll send a check and my address. Thanks, Steve.
wyomingsightdrifter.com
SSShooter
Posts: 2910
Joined: Mon Feb 20, 2012 7:06 am
Location: Jersey Shore

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by SSShooter »

Lumpy Grits wrote:Am I seeing a crack in the bend of the top one? :? Gary
Yep. Saving that one for you. :wink: Just a tool mark.
Glenn
jackrabbit
Posts: 1792
Joined: Mon Jul 23, 2012 12:04 pm
Location: Carpenter Wyoming

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by jackrabbit »

You guys be careful about selling stuff without consulting Kirk or Lucinda....
ChrisF
Posts: 1151
Joined: Mon Oct 28, 2013 1:33 pm

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by ChrisF »

Forum rules nothing is to be sold here!
stevewhr
Posts: 113
Joined: Thu Jan 30, 2014 10:15 am
Location: Cheyenne, Wyoming

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by stevewhr »

In that case, I rescind my interest. Thanks the same.
wyomingsightdrifter.com
User avatar
Lumpy Grits
Posts: 7673
Joined: Tue Jan 28, 2003 7:58 pm
Location: Springfield, Missouri-U.S.A. Earth

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by Lumpy Grits »

Jim Kidwell wrote:Glenn,
Steve's son said they would have a new site coming very soon. I thought it would be up by now. I have no idea what products he will be offering.......
Jim-Have you heard anything more on this?
Gary
"Hav'n you along, is like loose'n two good men"
Jim Kidwell
Posts: 3616
Joined: Sun Oct 06, 2002 6:15 pm
Location: Georgia

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by Jim Kidwell »

Nothing lately, but still hoping. I will let you know...............
....................................Jim
You are a ghost driving a meat covered skeleton made from stardust riding a rock floating through space.
Fear nothing. (anon)……………………
User avatar
Lumpy Grits
Posts: 7673
Joined: Tue Jan 28, 2003 7:58 pm
Location: Springfield, Missouri-U.S.A. Earth

Re: AZ ShrpShtr Cartridge Loading Tool(s)

Post by Lumpy Grits »

Thank you Jim.
Got some folks over on the SASS cowboy shooters forum looking for some.
G.
"Hav'n you along, is like loose'n two good men"
Post Reply