AZ ShrpShtr Cartridge Loading Tool(s)
-
- Posts: 2910
- Joined: Mon Feb 20, 2012 7:06 am
- Location: Jersey Shore
AZ ShrpShtr Cartridge Loading Tool(s)
As it appears that Arizona Sharpshooters is now defunct with the passing of Steve Rhoades (may he RIP) and I need another of his cartridge loading tools for my Hepburn I'm going to make up several to offer to our fellow shooters. If anyone has one for a Shiloh would loan it to me for a pattern I'll also make up several of them.
Glenn
- Lumpy Grits
- Posts: 7675
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: AZ ShrpShtr Cartridge Loading Tool(s)
Damn-it is gone
Gary
Gary
"Hav'n you along, is like loose'n two good men"
-
- Posts: 1061
- Joined: Wed Jan 31, 2007 3:38 pm
- Location: The Flatlands of Canada
Re: AZ ShrpShtr Cartridge Loading Tool(s)
Harlan Sage makes several different models in an acrylic plastic at a very reasonable price and may suit your purpose.
Paul
Paul
"My heroes have always been cowboys and they still are it seems."
-
- Posts: 1419
- Joined: Thu Dec 26, 2002 9:59 pm
- Location: East of yesterday and West of nowhere.
Re: AZ ShrpShtr Cartridge Loading Tool(s)
Saw 2 of Harlan's plastic ones broken this past Saturday at River Bend.
OPS
OPS
Barry C Jolly
"I envy no man that knows more than myself and pity them that know less:" Sir T. Brown
"Everyone must sacrifice at the altar of stupidity from time to time" A. Einstein
"I envy no man that knows more than myself and pity them that know less:" Sir T. Brown
"Everyone must sacrifice at the altar of stupidity from time to time" A. Einstein
-
- Posts: 2910
- Joined: Mon Feb 20, 2012 7:06 am
- Location: Jersey Shore
Re: AZ ShrpShtr Cartridge Loading Tool(s)
Yep. I'll stick with 6061 for the lever with a tool-steel pivot pin.
Glenn
-
- Posts: 1792
- Joined: Mon Jul 23, 2012 12:04 pm
- Location: Carpenter Wyoming
Re: AZ ShrpShtr Cartridge Loading Tool(s)
I have one you can use, Glenn. Are you headed to Texas this week?
- desert deuce
- Posts: 3845
- Joined: Mon Apr 14, 2008 10:51 pm
- Location: Rio Rico, Arizona
Re: AZ ShrpShtr Cartridge Loading Tool(s)
I seem to recall Moezingo has one for a 74 sharps and I have one for a Borchardt and another for a Hepburn all 3 from AZ Sharpshooters.
Sometimes you get the chicken, and sometimes you get the feathers!
- Lumpy Grits
- Posts: 7675
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: AZ ShrpShtr Cartridge Loading Tool(s)
Does anyone know if Steve made those himself, or where a vendored out??
Gary
Gary
"Hav'n you along, is like loose'n two good men"
- desert deuce
- Posts: 3845
- Joined: Mon Apr 14, 2008 10:51 pm
- Location: Rio Rico, Arizona
Re: AZ ShrpShtr Cartridge Loading Tool(s)
He made the two that I have and if I recall correctly I was present when he delivered two others to two other shooters that he said he made.
Sometimes you get the chicken, and sometimes you get the feathers!
- Lumpy Grits
- Posts: 7675
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: AZ ShrpShtr Cartridge Loading Tool(s)
Thank you DD.
G.
G.
"Hav'n you along, is like loose'n two good men"
-
- Posts: 1151
- Joined: Mon Oct 28, 2013 1:33 pm
Re: AZ ShrpShtr Cartridge Loading Tool(s)
I know someone looking into making them
Again. Will advise if they become available again.
Again. Will advise if they become available again.
-
- Posts: 2910
- Joined: Mon Feb 20, 2012 7:06 am
- Location: Jersey Shore
Re: AZ ShrpShtr Cartridge Loading Tool(s)
Cody is supplying one for a '74 and Gary for the HW and I have the Hepburn. If you would provide the Borchardt for measurements I'll add that to the mix. I'm away until 2nd week of June and will contact you then. Thanks to all.desert deuce wrote:I seem to recall Moezingo has one for a 74 sharps and I have one for a Borchardt and another for a Hepburn all 3 from AZ Sharpshooters.
If anyone wants one, please let me know via PM (can't respond until June) so I can figure out the #'s. Planning on making a run of 6 on all but the Borchardt (likely only do a couple). If you know you want one, I'll add to the run.
Glenn
-
- Posts: 417
- Joined: Mon Jul 21, 2014 9:22 am
- Location: Queensland, Australia.
Re: AZ ShrpShtr Cartridge Loading Tool(s)
Excuse my ignorance but what are cartridge loading tools?
What are they for, and why are they needed?
I googled it but only got reloading tools.
What are they for, and why are they needed?
I googled it but only got reloading tools.
-
- Posts: 1151
- Joined: Mon Oct 28, 2013 1:33 pm
Re: AZ ShrpShtr Cartridge Loading Tool(s)
Google cartridge camming seating tool. They are used to safely push a cartridge into the chamber. Could be to seat bullet into the lands or dirt inchsmber.
-
- Posts: 531
- Joined: Thu Feb 22, 2007 11:28 am
- Location: Southwest Utah
- Contact:
Re: AZ ShrpShtr Cartridge Loading Tool(s)
SSShooter wrote:As it appears that Arizona Sharpshooters is now defunct with the passing of Steve Rhoades (may he RIP) and I need another of his cartridge loading tools for my Hepburn I'm going to make up several to offer to our fellow shooters. If anyone has one for a Shiloh would loan it to me for a pattern I'll also make up several of them.
You still need one? I have one you can use if you're still in need.
SASS Life Member
NRA Life Member....
Which rifle should I shoot today???
NRA Life Member....
Which rifle should I shoot today???