Hadley sight disc
- kenny s
- Posts: 775
- Joined: Sat Nov 07, 2015 8:14 am
- Location: Venice FL
Hadley sight disc
Here is the first day with it at the range.
40 70 SS
74 Shiloh of course
100 yards
I tightened the sight picture with a small peep hole in the disc.
75 1 1/2 OE compressed 1/8
030 card wad
reg rifle primer,( not magnum)
417 BA PP bullet cast 1 in 20 and weighed. This batch was 417 grains.
PP with BA 25% cotton 9 pound,
A very tight left hand hold on the for end and a tight pull on the butt into the shoulder.
this mitigates the heavy hammer blow.
one wet and one dry between shots.
Most groups were 2 inches or less if I do my part.
then I pulled tighter on the butt.
this group measures just under an inch.
more to come next time...
Ken
You do not have the required permissions to view the files attached to this post.
- kenny s
- Posts: 775
- Joined: Sat Nov 07, 2015 8:14 am
- Location: Venice FL
Re: Hadley sight disc
Ok, right side up I hope...
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1962
- Joined: Sun Jun 03, 2007 10:07 am
- Location: Central Wi
Re: Hadley sight disc
I'll bet you were afraid to take the 5 th shot..
Just jesting..
Good shooting
beltfed/arnie
Just jesting..
Good shooting
beltfed/arnie
- kenny s
- Posts: 775
- Joined: Sat Nov 07, 2015 8:14 am
- Location: Venice FL
Re: Hadley sight disc
yup belfed. you got me there.
I looked at the bullet and the casting was not perfect.
so I Chickened out!
A buddy of mine reminded me to weigh the bullets....did that years ago, and just bought a F. Arsenal digital scale for about $30. works perfectly.
I shoot them in batches of like weighed bullets...
That BA mold is great. all of the 420 nominal bullets run between 416.0 and 417.5. very close.
Ken
I looked at the bullet and the casting was not perfect.
so I Chickened out!
A buddy of mine reminded me to weigh the bullets....did that years ago, and just bought a F. Arsenal digital scale for about $30. works perfectly.
I shoot them in batches of like weighed bullets...
That BA mold is great. all of the 420 nominal bullets run between 416.0 and 417.5. very close.
Ken