Sizing die for 50/90
-
- Posts: 12
- Joined: Thu Feb 08, 2018 3:48 pm
Sizing die for 50/90
Are you 50 cal shooters sizing your grease groove bullets? Lyman makes .509 or .512 dies. Seems like for a Shiloh 50 the .509 would be best and let the bullet bump up to groove diameter, is that thinking correct?
-
- Posts: 236
- Joined: Thu Mar 04, 2004 1:27 pm
Re: Sizing die for 50/90
I run a Lee push through sizer at .511 for both my 50-70 and 50-90 with great results on the targets. I pan lube , they drop from the mold at .511 or .512 depending on the bullet and the Lee sizer just barely brushes the bullets. I'd give the Lee sizer die a try. You will like it!