Those of you that shoot a .40 caliber BPCR may be interested in the article I just posted titled, “.40 Caliber BPCR Accuracy – Twist Rate vs. Bullet Length vs. Velocity”. It can be accessed at the following link:
http://www.texas-mac.com/40_Caliber_BPC ... ocity.html
Wayne
.40 Caliber BPCR Accuracy
-
- Posts: 2364
- Joined: Sun Nov 04, 2007 5:29 pm
- Location: Central Texas
- Contact:
.40 Caliber BPCR Accuracy
NRA Life (Benefactor & President's Council) Member, TSRA Life Member, NSSF Member, Author & Publisher of the Browning BPCR book
http://www.texas-mac.com
http://www.texas-mac.com
- desert deuce
- Posts: 3845
- Joined: Mon Apr 14, 2008 10:51 pm
- Location: Rio Rico, Arizona
Re: .40 Caliber BPCR Accuracy
Thank you for sharing Wayne.
Sometimes you get the chicken, and sometimes you get the feathers!
- kenny s
- Posts: 775
- Joined: Sat Nov 07, 2015 8:14 am
- Location: Venice FL
Re: .40 Caliber BPCR Accuracy
printing it now. thanks...Ken
- Lumpy Grits
- Posts: 7675
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: .40 Caliber BPCR Accuracy
Wayne-Have you tried other alloys in the 40?
What lube did you use?
Great information, and thank you
Gary
What lube did you use?
Great information, and thank you
Gary
"Hav'n you along, is like loose'n two good men"
-
- Posts: 2364
- Joined: Sun Nov 04, 2007 5:29 pm
- Location: Central Texas
- Contact:
Re: .40 Caliber BPCR Accuracy
Gary,Lumpy Grits wrote: ↑Wed Jun 19, 2019 2:28 pm Wayne-Have you tried other alloys in the 40?
What lube did you use?
Great information, and thank you
Gary
I've tried 30:1, 25:1, 20:1 and down to15:1 with many other alloy mixes in between. I mix my own lead/tin alloy and have a high precision laboratory scale to measure the specific gravity of the alloy to determine the actual mix. For the last couple of years I've stuck with 16:1 with "Money Bullet" designs
Concerning lubes, I started with standard SPG and eventually moved to White Lightning a few years ago. I still have a good bit of WL left and plan to eventually switch to DGL when the WL runs out.
Wayne
NRA Life (Benefactor & President's Council) Member, TSRA Life Member, NSSF Member, Author & Publisher of the Browning BPCR book
http://www.texas-mac.com
http://www.texas-mac.com
- Lumpy Grits
- Posts: 7675
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: .40 Caliber BPCR Accuracy
Thanks Wayne
Really do enjoy your articles.
G,
Really do enjoy your articles.
G,
"Hav'n you along, is like loose'n two good men"
- kenny s
- Posts: 775
- Joined: Sat Nov 07, 2015 8:14 am
- Location: Venice FL
Re: .40 Caliber BPCR Accuracy
OK. what mix using 415 and 365 PP bullets? The 415 grain is .393 bore wrapped to .400 and the .365 is two stage. .400 up front and 408 to the rear when wrapped with 9 lb. BA paper
and...what powder...1 1/2 or 2fg?
Swiss or OE.? using OE now.
My 40 70 SS seems to like 1 1/2. tried 2f, but it's not cleaner and groups 'seem' to be a little larger...
getting sub 2 inch at 100 and some 1 1/2 inch or less.
went from solid rest to CAS bench rest wood rest sticks. much tighter groups. barrel has been 'sounded' and marked at dead spot.
Ken
and...what powder...1 1/2 or 2fg?
Swiss or OE.? using OE now.
My 40 70 SS seems to like 1 1/2. tried 2f, but it's not cleaner and groups 'seem' to be a little larger...
getting sub 2 inch at 100 and some 1 1/2 inch or less.
went from solid rest to CAS bench rest wood rest sticks. much tighter groups. barrel has been 'sounded' and marked at dead spot.
Ken
- Lumpy Grits
- Posts: 7675
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: .40 Caliber BPCR Accuracy
Kenny-be sure the back of the forearm has no contact with the rec'r.
Gary
Gary
"Hav'n you along, is like loose'n two good men"
- kenny s
- Posts: 775
- Joined: Sat Nov 07, 2015 8:14 am
- Location: Venice FL
Re: .40 Caliber BPCR Accuracy
first thing I did Grumpy. good to mention though...
and I 'rang' the barrel to get the dead spot, which is about 5 inches from the muzzle
Ken
and I 'rang' the barrel to get the dead spot, which is about 5 inches from the muzzle
Ken