40/50 BN
- J.B.
- Posts: 646
- Joined: Tue Apr 20, 2004 10:31 pm
- Location: Australia
Re: 40/50 BN
Sure look purdy. Bet they shoot as good as they look.
"an experimental weapon..with experimental ammunition ? ...Lets experiment "
- DAVE ROELLE
- Posts: 678
- Joined: Sun Sep 19, 2010 11:30 am
- Location: CONROE TEXAS
Re: 40/50 BN
Those Cat'ridges look wicked for sure, show quality stuff !!!!!!-------------if they shoot as good as they look you should have some 100 yard cloverleafs
Dave
Dave
your never lost, if ya don't care where ya are
-
- Posts: 1015
- Joined: Mon Apr 16, 2007 9:29 pm
- Location: Casper Wyoming
Re: 40/50 BN
I loaded a total of 9 rounds.
The first three shots. The two next to each other and high, I shot threw a chronograph, 1st 1130, 2nd 1125. I moved the chronograph for the third shot in the black, (50 yards off hand.) I was shooting threw a piece of 1/2" lexan so I could recover my bullets.
- DAVE ROELLE
- Posts: 678
- Joined: Sun Sep 19, 2010 11:30 am
- Location: CONROE TEXAS
Re: 40/50 BN
Thats super Stephen--------------that riflegun is going to be a blast, specially for the kids to shoot !!!!!
Looking forward to seeing some longer range work, i would imagine a 100 yard sight setting might be about right for a hunting rifle---------------------it would be fun to do some terminal ballistics work and see how the bullets are going to perform at range.
Have fun with it Sir
Dave
Looking forward to seeing some longer range work, i would imagine a 100 yard sight setting might be about right for a hunting rifle---------------------it would be fun to do some terminal ballistics work and see how the bullets are going to perform at range.
Have fun with it Sir
Dave
your never lost, if ya don't care where ya are
-
- Posts: 1015
- Joined: Mon Apr 16, 2007 9:29 pm
- Location: Casper Wyoming
Re: 40/50 BN
Recovered bullet. Pure lead weighing 282 grains.
- DAVE ROELLE
- Posts: 678
- Joined: Sun Sep 19, 2010 11:30 am
- Location: CONROE TEXAS
Re: 40/50 BN
Hi Stephen:
The alloy is certainly correct and the "dirt test" passed------------------------------time for some MEAT
I'm playing around with a sawdust and oil recovery system to do some terminal investigation, and yes i know its not going to be a true representation of hunting performance but i think its will be FUN !!!!!
Off to the ranch for the weekend
Keep well and stay safe
Dave
The alloy is certainly correct and the "dirt test" passed------------------------------time for some MEAT
I'm playing around with a sawdust and oil recovery system to do some terminal investigation, and yes i know its not going to be a true representation of hunting performance but i think its will be FUN !!!!!
Off to the ranch for the weekend
Keep well and stay safe
Dave
your never lost, if ya don't care where ya are
-
- Posts: 2259
- Joined: Tue Nov 12, 2002 10:16 pm
- Location: Colorado
Re: 40/50 BN
Stephen;
The bullets look nice and round but your target drawing circles could use some work I think. I bet you could get that egg shape thing worked out if you try though. Getting something with a home cast bullet is rewarding, getting something with a bullet from a homemade mould would be way more rewarding. Good luck.
The bullets look nice and round but your target drawing circles could use some work I think. I bet you could get that egg shape thing worked out if you try though. Getting something with a home cast bullet is rewarding, getting something with a bullet from a homemade mould would be way more rewarding. Good luck.
-
- Posts: 3858
- Joined: Tue Nov 23, 2004 12:52 pm
Re: 40/50 BN
Stephen, you see the nose profile of them factory 40-50 SBN's in taylorz1's post over in black powder shooting? Did you cup base yours and nose pour them? Maybe a guy could get taylorz1 to provide some dimensions and a drawing? bobw
bobw
-
- Posts: 1015
- Joined: Mon Apr 16, 2007 9:29 pm
- Location: Casper Wyoming
Re: 40/50 BN
bobw wrote:Stephen, you see the nose profile of them factory 40-50 SBN's in taylorz1's post over in black powder shooting? Did you cup base yours and nose pour them? Maybe a guy could get taylorz1 to provide some dimensions and a drawing? bobw
I have a BN just like his Bob and an original 40/50 straight that matches the picture in the original Sharps catalog. That is the bullet that I duplicated. The mold I built is a double cavity nose pour flat base non adjustable.
Thanks
-
- Posts: 3858
- Joined: Tue Nov 23, 2004 12:52 pm
-
- Posts: 1015
- Joined: Mon Apr 16, 2007 9:29 pm
- Location: Casper Wyoming
Re: 40/50 BN
No not yet, work got in the way. I did get a 100 cases trimmed and sized. Fifty cases with powder and a card. That's where I left it. Maybe next week, this weekend is shot.
Thanks
PS. Bob why did you have to remind me I'm 40/50 poor? Thanks a lot!
Thanks
PS. Bob why did you have to remind me I'm 40/50 poor? Thanks a lot!
-
- Posts: 3858
- Joined: Tue Nov 23, 2004 12:52 pm
Re: 40/50 BN
Bad spelling, typing to fast for accuracy. I meant have you got it broken in yet? While saving the dastardly job of casting for yourself, your son holding the gun looks to have talented fingers and appears to me that he needs an advanced study course as well as attendant practice of cutting patches and wrapping them. Kids need to know nothing good is free and it means more to be part of it. I cut some patches for the 40 TGBS adj down to 265 grs and have discovered why shooters 125 years ago turned wussy and went to greasers . No doubt now in my mind that after the buffalo were gone and all those women and girls that patched for Sharps as well as the other ammo companies were layed off, going to work at other pursuits. Affluent shooters couldn't bring themselves to the menial toil of patching their own bullets. Especially so when the trend went to shorter range target shooting with smaller calibers like 38 and 40 cals whose patches can best be described as miniscule. bobw
bobw
-
- Posts: 2239
- Joined: Mon May 16, 2005 2:54 pm
- Location: Buffalo Wy
Re: 40/50 BN
Bobw
The girls patching bullets were long gone, by the time major ammunition company's got going, every one had bullet patching machines, Borchardt invented one, I have some of the patent drawing but they are not complete.
The girls patching bullets were long gone, by the time major ammunition company's got going, every one had bullet patching machines, Borchardt invented one, I have some of the patent drawing but they are not complete.
Charter Member O-G-A-N-T
Shooting grease groove bullets in a sharps is new technology and just a passing fad.
Shooting grease groove bullets in a sharps is new technology and just a passing fad.
- powderburner
- Posts: 2990
- Joined: Sat May 24, 2003 12:23 am
- Location: elko nv.
Re: 40/50 BN
bob , use a 3/4 in patch , and wrap a thousand of them then they wont feel so foreign to your fingers , your big bullets will feel like laying a sheet on a culvert after a bunch of the 40s .
Dean Becker
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T
-
- Posts: 3858
- Joined: Tue Nov 23, 2004 12:52 pm
Re: 40/50 BN
Yup Dean, they are awkward but well worth it. Got a couple hundred loaded for the 1000 guess I am ready other than packing. bobw
bobw