South Texas buck with the 50-90 PP

Share your tales (tall or otherwise) of hunting adventures.

Moderators: Kirk, Lucinda

Post Reply
coolhand
Posts: 46
Joined: Thu Jan 19, 2017 6:20 am

South Texas buck with the 50-90 PP

Post by coolhand » Sun Dec 06, 2020 8:10 pm

Hey Guys,
Took this nice South Texas Whitetail the other morning with the new 50-90.

Image

Image

Special thanks to Stephen, Orville, and Redneck who helped me get set up with the load and sights.

User avatar
powderburner
Posts: 2786
Joined: Sat May 24, 2003 12:23 am
Location: elko nv.

Re: South Texas buck with the 50-90 PP

Post by powderburner » Sun Dec 06, 2020 8:23 pm

Thats doing it right ok. Nice buck nice rifle
Dean Becker
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T

Dan O
Posts: 696
Joined: Sun May 01, 2005 3:05 pm
Location: Great Falls Montana

Re: South Texas buck with the 50-90 PP

Post by Dan O » Mon Dec 07, 2020 11:47 am

Congrats that's a nice buck. Tell us about the load and the shot/hunt if you have the time to do so.

User avatar
DAVE ROELLE
Posts: 660
Joined: Sun Sep 19, 2010 11:30 am
Location: CONROE TEXAS

Re: South Texas buck with the 50-90 PP

Post by DAVE ROELLE » Mon Dec 07, 2020 4:07 pm

Crushed em again Jack------------great deer critter, super riflegun 😉 Next 🤔
your never lost, if ya don't care where ya are

coolhand
Posts: 46
Joined: Thu Jan 19, 2017 6:20 am

Re: South Texas buck with the 50-90 PP

Post by coolhand » Mon Dec 07, 2020 7:59 pm

The load is made up of Starline brass, 100 grns. of Swiss 1F, two .030 card wads with a 3/8" lube cookie of SPG Tropical. The bullet is 478g cast 30/1 from a KAL adjustable Mould and paper patched. I was trying to copy the original 473g PP Sharps bullet, but I never could get it just right. The Rifle has Orville's paper patch chamber so I just hand seat the bullets. I had hunted this deer for 2 years and never seen him in daylight. I knew my best chance was to catch him was when the rut starts. I put up a ground blind in an area I knew he lived. It is just in the early stages of the south Texas rut, but Tuesday morning he came by pushing a doe right at daylight. I could just barely focus on the Stephen Bourd custom front sight. I put it on the shoulder and touched it off. I heard the hit, but the smoke cloud blocked any view. When the smoke cleared he was gone. I was disappointed he didn't fall right there, and immediately thought the worse. I decided to wait at least 30 minutes before I walked down there. Of course it seemed like an hour, but I finally walked to where he was standing 95 yds away. I found good lung blood, and a good blood trail. It was easy to follow and I found him about 50 yards away. My shot was good vertical but a little forward. The big 50 punched straight through. This is the 3rd buck for me with the Sharps, my other two with the 45-90. This deer was 7-8 years old and weighed right at 200#. I am blessed to have a place to hunt with good deer, and lots of them. I need to take a couple more does, and maybe a cull buck so the new Sharps should get a good workout. I really appreciate all the help from members here that helped me. I had many stupid questions, but always got good advice. I have been hunting Texas Whitetails for over 50 years, and this Sharps thing is the most rewarding hunting experience i've ever had.

coolhand
Posts: 46
Joined: Thu Jan 19, 2017 6:20 am

Re: South Texas buck with the 50-90 PP

Post by coolhand » Mon Dec 07, 2020 8:16 pm

Thanks Dave! How are things at your ranch? Still whacking those hogs?

bobw
Posts: 3385
Joined: Tue Nov 23, 2004 12:52 pm

Re: South Texas buck with the 50-90 PP

Post by bobw » Mon Dec 07, 2020 8:44 pm

Congrats coolhand, great buck and the rifle makes you a time traveler way to get them. Bobw
bobw

User avatar
DAVE ROELLE
Posts: 660
Joined: Sun Sep 19, 2010 11:30 am
Location: CONROE TEXAS

Re: South Texas buck with the 50-90 PP

Post by DAVE ROELLE » Tue Dec 08, 2020 7:20 am

Yup, now its time to sort out cull bucks for the boys to take 😉
your never lost, if ya don't care where ya are

rdnck
Posts: 1885
Joined: Tue Oct 29, 2002 9:33 pm
Location: Woodlawn,Texas

Re: South Texas buck with the 50-90 PP

Post by rdnck » Tue Dec 08, 2020 1:53 pm

Congratulations on a really good deer by any standard. I also enjoyed the post, good job on that, too. Once you start using a Sharps, it becomes special. Nothing else comes close. Shoot straight, rdnck.
Chairman, Phd
Caddo Lake Chapter
FES
Charter Member FBASS

Charter Member OGANT

Orville
Posts: 2228
Joined: Mon May 16, 2005 2:54 pm
Location: Buffalo Wy

Re: South Texas buck with the 50-90 PP

Post by Orville » Thu Dec 10, 2020 9:23 am

Cool hand if you use 1-60 alloy then the wt and length of your bullet will match the original if I was at home I could tell you the length of the original bullet, I’m in AZ for the winter
Charter Member O-G-A-N-T

Shooting grease groove bullets in a sharps is new technology and just a passing fad.

User avatar
powderburner
Posts: 2786
Joined: Sat May 24, 2003 12:23 am
Location: elko nv.

Re: South Texas buck with the 50-90 PP

Post by powderburner » Thu Dec 10, 2020 10:29 am

I just measured one of Orvilles swaged bullets and the length is 1.060 and it weighs on my scale 472.8 hope this helps .
Dean Becker
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T

Gussy
Posts: 1483
Joined: Mon May 05, 2008 2:37 pm
Location: WA, dry side
Contact:

Re: South Texas buck with the 50-90 PP

Post by Gussy » Thu Dec 10, 2020 7:43 pm

Very nice buck!!

coolhand
Posts: 46
Joined: Thu Jan 19, 2017 6:20 am

Re: South Texas buck with the 50-90 PP

Post by coolhand » Tue Dec 15, 2020 9:00 am

Hey guys, I was wrong. I went back and measured one of my unpatched bullets. It measured 1.066", and weighed exactly 472g. So I guess i'm pretty close after all.

User avatar
powderburner
Posts: 2786
Joined: Sat May 24, 2003 12:23 am
Location: elko nv.

Re: South Texas buck with the 50-90 PP

Post by powderburner » Tue Dec 15, 2020 11:52 am

Sounds like you got it just right. Lead isnt as dense as it was a 150 years ago is the one grain difference
Dean Becker
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T

Post Reply