OH YES
-
- Posts: 9
- Joined: Wed Jul 29, 2009 6:22 pm
OH YES
Well Guys
I am now the Proud owner of a FIRING!!! Sharps
5 of my home made bullets, cotton paper, filler and 50 grains of pyrodex, NOT ONE Misfire
I have to Thank All of you for getting this ignorant Ol' man through my issues with the 1863. Which I might add was 100% my ignorance.
As everyone TOLD me time and time again the breech block was blocked or restricted. The hole from the center nipple to the main nipple was 50% closed up with very hard carbon, rust, or some type of corrosion.
I was measuring the size holes to show with pictures of my breech block taken apart. I was using drill bits to measure with. I knew that the thread clean out hole was 4 mm. but the hole going to the bottom of the main nipple was starting out at apx. .050. as I was pushing it in and turning I saw some black stuff come out, then I tried a .053 and I forced it through.
I continued until I could not get a .100 bit to go. I used a dremal tool to work the drill bits, after the .053 bit by hand.
I must say special thanks to Mr. MissedAgain without him I would have given up.
Thanks to the moderator for deleting my other post, he stopped me from making a big mistake.
Mr Snap cap...I may have you beat...I know I have went through 100+ caps with a single fire
Again Many Thanks to all of you
Joey Fletcher
Durham NC
PS...I am going to burn some powder
- snapcap14
- Posts: 279
- Joined: Thu Sep 21, 2006 10:07 am
Yep I think you do. Wow now I do not feel all that bad. I would go 5-6 in a row with out a bang or even a cap going off. maybe 100 or so caps but not in a row. Frustrating to me but in timed team events the team was not very happy and I took a lot of should I tell you until I got it straightened out.
Well good luck let us know how your grouping gose w/ it.
Well good luck let us know how your grouping gose w/ it.
Standing on the ROCK
14th VA. Cav.
N-SSA
14th VA. Cav.
N-SSA