Page 1 of 1

Cleaning the '63

Posted: Fri Mar 26, 2010 8:43 pm
by Todd Birch
I don't often remove the forend from my '63s for cleaning of the lever spring area and corresponding recess in the fore stock.
I did following my last range session and to say it was grubby is an understatement. The fit of the barrel band is quite tight, requiring a few taps with a rawhide mallet to induce it to move.

I took the opportunity to apply a little wax stock finish to the barrel channel and the covered metal was well. I find it hard to believe that CW soldiers gave their Sharps rifles all due care and attention after a day of foot slogging or bloody combat.

I've read that when the slant breech was first used by the military, excess powder would accumulate in this area and 'flash' after a build up. That must have been exciting .....

After watching a CW battle reenactment, I'm convinced that I would not want to put multiple blank rds thru' my '63s. If I'm going to dirty it, at least I want it to be done with live fire.