Taylor's floating chamber tool

Support for the 1863 shooter. Discussions of powders, loads, bullets, etc.
Post Reply
JamesW
Posts: 37
Joined: Thu Nov 12, 2015 3:40 pm
Location: Free State of Tennessee

Taylor's floating chamber tool

Post by JamesW »

Does this tool work on freeing stuck floating chambers on antique Sharps percussion rifles? I've got an 1853 Sporting with a stuck floating chamber.
Boston Bill
Posts: 38
Joined: Mon Oct 02, 2017 2:46 pm

Re: Taylor's floating chamber tool

Post by Boston Bill »

My 1863's do not have a floating chamber so I really do not know how they work. I am guessing yours is a repro? Anyway, the guys always seems to say to use Kroil. Stuff in front of the chamber and let it sit for a few days or weeks and see what happens? Best guess. Good Luck.
Happy Shooting!!! :D
Boston Bill
Posts: 38
Joined: Mon Oct 02, 2017 2:46 pm

Re: Taylor's floating chamber tool

Post by Boston Bill »

Oh, a picture of the tool or a link might be helpful for the guys and gals.
Happy Shooting!!! :D
Seahawk
Posts: 5
Joined: Tue Oct 25, 2016 2:45 pm

Re: Taylor's floating chamber tool

Post by Seahawk »

i got one from taylors,..took half a lifetime to get it,..but it did work,had to soak it in kroil for a couple days,but it finally let go,..the key is to keep it clean and lubricated
User avatar
kenny sd
Posts: 382
Joined: Mon Jan 06, 2020 9:24 am
Location: florida

Re: Taylor's floating chamber tool

Post by kenny sd »

it is called a bushe, and all 63's had them.
I'd like to get mine out, but don't want to mess with the original....I'll try soaking as noted in kroil, but don't think I'll do the tool...

I could do a sero safe chamber cast....then pop it out from the front. stuck broken shells pop out with this idea.

'leave well enough alone...
always good advice.
User avatar
kenny sd
Posts: 382
Joined: Mon Jan 06, 2020 9:24 am
Location: florida

Re: Taylor's floating chamber tool

Post by kenny sd »

ok.. talked myself into the $15 for the Taylors tool. I'll let you know how it works.
I'm soaking the 63 original carbine in Kroil while I wait. don't intend to shoot it, but I have to try it for the short money.
Ken
User avatar
kenny sd
Posts: 382
Joined: Mon Jan 06, 2020 9:24 am
Location: florida

Re: Taylor's floating chamber tool

Post by kenny sd »

ok.. talked myself into the $15 for the Taylors tool. I'll let you know how it works.
I'm soaking the 63 original carbine in Kroil while I wait. don't intend to shoot it, but I have to try it for the short money.
Ken
User avatar
kenny sd
Posts: 382
Joined: Mon Jan 06, 2020 9:24 am
Location: florida

Re: Taylor's floating chamber tool

Post by kenny sd »

dont do it, will not work...oh well..leave well enough alone.
Post Reply