sharps percussion nipple wrench

Support for the 1863 shooter. Discussions of powders, loads, bullets, etc.
Post Reply
User avatar
kenny sd
Posts: 226
Joined: Mon Jan 06, 2020 9:24 am
Location: florida

sharps percussion nipple wrench

Post by kenny sd » Wed Jun 24, 2020 2:37 pm

I have an original sharps 1863 percussion carbine. I'd like to find a nipple wrench to fit.
any ideas??
thanks..Ken

Chief Beck
Posts: 760
Joined: Wed Jun 01, 2005 8:51 pm
Location: Patton State Hospital

Re: sharps percussion nipple wrench

Post by Chief Beck » Wed Jun 24, 2020 6:38 pm

I would try Dixie Gunworks.

Dennis
"40 knots, no smoke"

"No man who refuses to bear arms in defense of his nation can give a sound reason why he should be allowed to live in a free country."
Teddy Roosevelt

George Babits
Posts: 280
Joined: Tue Jun 16, 2015 10:53 am

Re: sharps percussion nipple wrench

Post by George Babits » Wed Jun 24, 2020 6:46 pm

If you don't need to be "authentic" a 1/4" open end will work fine, maybe even better.

George

User avatar
kenny sd
Posts: 226
Joined: Mon Jan 06, 2020 9:24 am
Location: florida

Re: sharps percussion nipple wrench

Post by kenny sd » Wed Jun 24, 2020 8:04 pm

Yeah, I have the open end wrench, but it's a pain to use. what did they use in the CW?

Seahawk
Posts: 5
Joined: Tue Oct 25, 2016 2:45 pm

Re: sharps percussion nipple wrench

Post by Seahawk » Thu Jun 25, 2020 5:21 am

check with lodgewood, pretty sure he has them

User avatar
kenny sd
Posts: 226
Joined: Mon Jan 06, 2020 9:24 am
Location: florida

Re: sharps percussion nipple wrench

Post by kenny sd » Thu Jun 25, 2020 9:38 am

good thought but nope....he has the 50 70 type, but I would like the percussion type.

Seahawk
Posts: 5
Joined: Tue Oct 25, 2016 2:45 pm

Re: sharps percussion nipple wrench

Post by Seahawk » Thu Jun 25, 2020 11:23 am

S & S firearms may have them

Boston Bill
Posts: 36
Joined: Mon Oct 02, 2017 2:46 pm

Re: sharps percussion nipple wrench

Post by Boston Bill » Thu Jun 25, 2020 5:22 pm

I got mine at Track of the Wolf. I did have to adjust it a bit. Had to file it a little wider than it came.
Happy Shooting!!! :D

Post Reply