Hello:
Got the cerrosafe the other day and started to experiment with the chamber and bore casting process. As near as I can figure the 2.1" is the proper length, the neck is .620 in length and the bore diameter is .409. So I have the dimensions needed to buy a mould for casting. Does anybody have adresses on either Brooks ,Saeco or whoever makes a good quality mould. I am open to suggestions from the forum on what would suit me best. I will be using for sillouete and hunting posiibly long range to possibly 800yds.Also will Goex ffg work in this cartridge?Thanks for any input.
40X2.1"SBN
-
Rob A.
- Posts: 37
- Joined: Thu Jan 08, 2004 9:13 pm
- Location: St. Albert Alberta Canada
-
Rickd
- Posts: 174
- Joined: Thu Oct 09, 2003 7:18 pm
- Location: DeLand, Florida
Paul Jones Moulds www.pauljonesmoulds.com
A lot of guys shooting 40's are using Pauls 420 grain creedmore. Very knowledgeable, and a reputation for making the best moulds period. Cerrosafe apparently will continue to expand over time giving a reading that is larger than the barrel diameter at some point. That was a comment that Paul made. Good shootin!
A lot of guys shooting 40's are using Pauls 420 grain creedmore. Very knowledgeable, and a reputation for making the best moulds period. Cerrosafe apparently will continue to expand over time giving a reading that is larger than the barrel diameter at some point. That was a comment that Paul made. Good shootin!