When they say to remove the gas check plate, clean it and grease it, what kind or type of grease is the best to use. The gas plate fits tight and took a small screw drive on both sides to remove it. Do you use the same grease on the nipple?
Frank Costa
Gas Check Plate - Grease ?
-
- Posts: 287
- Joined: Wed Sep 25, 2002 2:20 pm
- Location: Amador Co., California
Gas Check Plate - Grease ?
SHILOH 74 #1 SPORTER
SHILOH 63 CARBINE
SHILOH 1
SHILOH SHARPS RIFLE CLUB
TRUE SPORTSMAN CLUB
NRA
SASS
SHILOH 63 CARBINE
SHILOH 1
SHILOH SHARPS RIFLE CLUB
TRUE SPORTSMAN CLUB
NRA
SASS
Frank
This is the reply given to me by Kirk on the same subject.
"Hi, everything sounds good, go to your local auto store and buy some anti- sieze, put this on the threads and around the gas plate surface that slides in the block. This will make for easy disassembly after shooting, the black powder tends to lock up these parts. Don't worry about the screw that goes through the link. Thanks Kirk"
Good shootin
Dan
This is the reply given to me by Kirk on the same subject.
"Hi, everything sounds good, go to your local auto store and buy some anti- sieze, put this on the threads and around the gas plate surface that slides in the block. This will make for easy disassembly after shooting, the black powder tends to lock up these parts. Don't worry about the screw that goes through the link. Thanks Kirk"
Good shootin
Dan