Gentlemen,
Has anyone here used the Pedersoli Sharps mold in the .54 Shiloh chamber? If so, what were your results?
Pedersoli Bullet Mold
-
- Posts: 2
- Joined: Thu Jun 08, 2017 10:27 am
Re: Pedersoli Bullet Mold
Greetings Sir. New to the board.
I shoot the Confederate Sharps Carbine in the .54 and use the Pedersoli bullet shooting in the N-SSA competitions in the Southern region.
I use Nitrated paper and had the breech and spring works tweaked by Mr. Flees. The round does well. Heavy at 535 grains, but a nice
round and with the 4th ring being slightly smaller (so that it can fit the pricey brass cartridges that I thought I was going to use originally from Pedersoli) and then I can roll my tubes and use finger nail polish to hold the round in the tube.
I shoot the Confederate Sharps Carbine in the .54 and use the Pedersoli bullet shooting in the N-SSA competitions in the Southern region.
I use Nitrated paper and had the breech and spring works tweaked by Mr. Flees. The round does well. Heavy at 535 grains, but a nice
round and with the 4th ring being slightly smaller (so that it can fit the pricey brass cartridges that I thought I was going to use originally from Pedersoli) and then I can roll my tubes and use finger nail polish to hold the round in the tube.
-
- Posts: 119
- Joined: Mon Nov 02, 2009 12:49 pm
Re: Pedersoli Bullet Mold
My '63 #3 sporter seems to like the Brooks "Hahn Style" .54 bullet along with the Rapine .54 bullet. I didn't have much luck with the Pedersoli bullet.
Jay Y.
Jay Y.
- whoop-up country
- Posts: 326
- Joined: Tue Apr 06, 2010 1:28 pm
- Location: Lethbridge, Alberta, Canada
Re: Pedersoli Bullet Mold
I am not a 1863 owner or shooter, but I just found this on ebay.
it is a ringtail bullet, so some of you might be interested in it.
http://www.ebay.com/itm/Bullet-Mold-/17 ... SwrhBZKiX9
Bob
it is a ringtail bullet, so some of you might be interested in it.
http://www.ebay.com/itm/Bullet-Mold-/17 ... SwrhBZKiX9
Bob
- snapcap14
- Posts: 279
- Joined: Thu Sep 21, 2006 10:07 am
Re: Pedersoli Bullet Mold
mine likes the brooks hahn mold. and it loves the moose Bagden stile mold.
Standing on the ROCK
14th VA. Cav.
N-SSA
14th VA. Cav.
N-SSA