Rifle was my .45-70 Shiloh. Load was a 518gr dry paper patched 30:1 bullet from an accurate mold over 75gr of Old E FFg, with a couple of card wads sandwiching a 3/16” cookie of my own recipe. Paper was waterproofed a bit with bullet lube since I was expecting wet weather. Muzzle velocity is 1250fps.
Bullet hit inside the point of the left front shoulder, took out one lung, part of the liver, and exited the lower portion of the right ham. Complete penetration from stem to stern of a 205lb whitetail. He ran into the tree line, showing obvious signs of being hit. We gave it about 15 minutes and went to collect—we thought. After following the bloodtrail about 80 yards or so into a dense swamp, I came face to face with this deer at 10 yards, staring straight at me out of an evergreen thicket, and STANDING. Old boy was so juiced up because of the rut that he was still up, and MAD. Took me a second to even register, and the guide said, “Is that even the same deer?!” since it would be unbelievable for him to still be standing. After what was probably just a second or two, but what seemed like an eternity, I saw that split tine on his left side and knew it was my guy. As I cocked and raised the rifle, he started turning and I put a second round into his chest roughly broadside, and he staggered and slowed but didn’t stop. I quickly had another one in the pipe and a third round into him, which probably wasn’t necessary, but he was still standing, so I was still shooting. Finally, this magnificent animal had enough and down he went.
This is my biggest whitetail ever, and the way it all went down will make it one of the most memorable hunts of my life. The guide had never seen anything like it, either, and we talked about how crazy the whole thing was for hours afterwards. This deer was scarred and cut, his antlers were rounded and chipped from rubbing and fighting, and the opportunity to view all of the rut activity I saw and harvest this animal is one I will never forget, made even more memorable by using a sharps, with bullets I cast, patched, and loaded.
I want to give thanks to this forum, and especially to rdnck, who has given me a lot of pointers on load development and using barrel sights that have all worked out exceedingly well!
![Image](http://i1030.photobucket.com/albums/y366/spqr476/3E453B25-3CBA-4EB1-8C74-82D2425BE43B.jpeg)
![Image](http://i1030.photobucket.com/albums/y366/spqr476/3FA25BBE-F18C-47C3-A0FC-4E85B4308EAD.jpeg)
![Image](http://i1030.photobucket.com/albums/y366/spqr476/286AF8C5-3B1B-495F-891E-13E0959AD870.jpeg)