45-110 ammo boxes?
-
- Posts: 2774
- Joined: Tue Jun 23, 2009 6:16 pm
Re: 45-110 ammo boxes?
I should also add that the price of the brass for that .45-110 will make pretty much any nice wooden box look very cheap.
Chris.
Chris.
- losttrail
- Posts: 362
- Joined: Tue Jul 17, 2012 11:21 am
- Location: Montana
Re: 45-110 ammo boxes?
Nope, no canvas bags for me. For my 40-65 I have MTM boxes. I know, $5 boxes for a $3,200 rifle. I don't get that since the boxes are for the ammo, but okay.bryany wrote: ↑Mon Jul 13, 2020 2:01 pm I once saw a guy bring his rifle to the line along with a canvas sack of ammo. Maybe that was you?
I've used the MTM boxes in the past and still do for some types of ammo. It just struck me as funny to spend serious money on a rifle and then get all butt hurt cheap on ammo boxes.
Bryan
“That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It our job to see that it stays there.” - George Orwell
NRA Life Member
SASS Member
RMEF member
Army Veteran, Tank Commander
NRA Life Member
SASS Member
RMEF member
Army Veteran, Tank Commander
- losttrail
- Posts: 362
- Joined: Tue Jul 17, 2012 11:21 am
- Location: Montana
Re: 45-110 ammo boxes?
I agree, that's why I will have one or two of those for taking to the line. But in my loading room, I can save some coin.
Just asking for some insight, info from folks more experienced than myself with the big 45's.
“That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It our job to see that it stays there.” - George Orwell
NRA Life Member
SASS Member
RMEF member
Army Veteran, Tank Commander
NRA Life Member
SASS Member
RMEF member
Army Veteran, Tank Commander
-
- Posts: 2774
- Joined: Tue Jun 23, 2009 6:16 pm
Re: 45-110 ammo boxes?
Fair enough!
When I use plastic boxes for my .45-110 I've actually been using 20 round slip top cases by J&J Products. I like them way more than the MTM plastic cases. They are much thicker and made of a slightly more flexible material. They will hold .45-110 rounds base down, even with a paper patched bullet seated only 0.1" in the case. The only downside is that they only hold 20 so you need a bunch.
Chris.
-
- Posts: 6064
- Joined: Sat Feb 07, 2009 9:02 am
- Location: Freetown, Indiana
Re: 45-110 ammo boxes?
I'm staying out of this discussion, since I use MTM green plastic boxes to get to the range, then transfer to my a wooden line box for the match, and I can make as many wooden ammo boxes as I want. At least I use a wooden box on the line. Of course, I use a plastic and foam rifle case to get transport my rifle to the range. Hmmmm!
Woody
Woody
Richard A. Wood
If you are surrounded. You are in a target rich environment.
If you are surrounded. You are in a target rich environment.
- J.B.
- Posts: 646
- Joined: Tue Apr 20, 2004 10:31 pm
- Location: Australia
Re: 45-110 ammo boxes?
Woody .. I'd order one of your ammo boxes in a heartbeat if I thought I could land it here safe and sound but I fear for its safety. Actually at present it doesn't look like anything is being mailed from the U.S. as I've been waiting on various items for a dogs age. Canada seem to be o.k. but not mainland U.S. I even considered bringing one home on the plane but seeing what some people refer to as 'carry on' these days..being shouldered into overhead lockers.. I dont think it would have survived there either. With regard ammo boxes for the long 45's.. I've used the J & J slip top boxes with great success. Never had them large enough to take the rim down...but apparently that size is available. Berrys also make a good range of both hinged and slip top boxes. 45's are a breeze. Try finding rim down boxes for 44/77's and 50's ! MTM seem to do a good job up to 45/90 perhaps..but then there are issues with clearance from memory.
J.B.
J.B.
"an experimental weapon..with experimental ammunition ? ...Lets experiment "
- losttrail
- Posts: 362
- Joined: Tue Jul 17, 2012 11:21 am
- Location: Montana
Re: 45-110 ammo boxes?
Woody,
I’ve been admiring your boxes for years. Hopefully I can order one soon. Or maybe meet at a match somewhere.
Your method is what I’m looking at emulating. I transport my CAS guns in a Pelican case, another for my C. Sharps 1875. Will add another for the Quigley.
I’ve been admiring your boxes for years. Hopefully I can order one soon. Or maybe meet at a match somewhere.
Your method is what I’m looking at emulating. I transport my CAS guns in a Pelican case, another for my C. Sharps 1875. Will add another for the Quigley.
“That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It our job to see that it stays there.” - George Orwell
NRA Life Member
SASS Member
RMEF member
Army Veteran, Tank Commander
NRA Life Member
SASS Member
RMEF member
Army Veteran, Tank Commander
- losttrail
- Posts: 362
- Joined: Tue Jul 17, 2012 11:21 am
- Location: Montana
Re: 45-110 ammo boxes?
Gunmaker,
Thanks, I had forgotten to check J&J. 20’s will work I’m sure.
Thanks, I had forgotten to check J&J. 20’s will work I’m sure.
“That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It our job to see that it stays there.” - George Orwell
NRA Life Member
SASS Member
RMEF member
Army Veteran, Tank Commander
NRA Life Member
SASS Member
RMEF member
Army Veteran, Tank Commander
- august west
- Posts: 105
- Joined: Wed Apr 29, 2020 7:32 am
- Location: Ooltewah, TN
Re: 45-110 ammo boxes?
Anything that will hold 50 BMG will hold 45 2 7/8". Lots of boxes out there for this, lots of people shoot it. This could include a 50 caliber ammo can - ammo laid in there in alternate directions would be secure. Plus MTM has a lot of nesting ammo cases/trays for carrying large quantities of ammo to the range.
"It ain't like it used to be but...it'll do." - Old Man Sykes
-
- Posts: 1580
- Joined: Mon May 05, 2008 2:37 pm
- Location: WA, dry side
- Contact:
Re: 45-110 ammo boxes?
For just plain bulk storage, a military ammo box is cheap and saves space. Even cheaper and lighter, Harbor Freight plastic ammo boxes work good too. I carry bulk and then put the days ammo into MTM boxes to use on the range.
-
- Posts: 3858
- Joined: Tue Nov 23, 2004 12:52 pm
Re: 45-110 ammo boxes?
Several points, H-50 Xl boxes work but you do not drill them out for ppb's each cartridge hole in the tray has 4 plastic tabs that need to be trimmed flush with the partition,that's 200 cuts for each box with a razor blade knife. You don't need to snag any patches or patch edges with protruding plastic edges. Most importantly for me is R factor, plastic boxed ammo heats up as the sunshines on it enough to make lube wads and bullet lube melt. The wood box does not have this problem it temperature shelters your ammo. Bobw
bobw
-
- Posts: 119
- Joined: Wed Feb 04, 2009 11:49 am
- Location: Southwest Oklahoma
Re: 45-110 ammo boxes?
if you can do any kind of wood work you can make your own, I made my own wooden box holders for my 45-70.
Chris
Chris
Chris Wilson
- kenny sd
- Posts: 382
- Joined: Mon Jan 06, 2020 9:24 am
- Location: florida
Re: 45-110 ammo boxes?
go on line. look up the original Sharps bullet lables. print them..
you can buy boxes on line too...very cheap...and cut and glue them..Ken
you can buy boxes on line too...very cheap...and cut and glue them..Ken
You do not have the required permissions to view the files attached to this post.
- kenny sd
- Posts: 382
- Joined: Mon Jan 06, 2020 9:24 am
- Location: florida
Re: 45-110 ammo boxes?
go on line. look up the original Sharps bullet lables. print them..
you can buy boxes on line too...very cheap...and cut and glue them..Ken
you can buy boxes on line too...very cheap...and cut and glue them..Ken
You do not have the required permissions to view the files attached to this post.
- kenny sd
- Posts: 382
- Joined: Mon Jan 06, 2020 9:24 am
- Location: florida
Re: 45-110 ammo boxes?
go on line. look up the original Sharps bullet lables. print them..
you can buy boxes on line too...very cheap...and cut and glue them..Ken
you can buy boxes on line too...very cheap...and cut and glue them..Ken
You do not have the required permissions to view the files attached to this post.