Wayne,
I am surprised you did not find larger "body wrap" pieces of the patch paper.
I always find them within 10 feet of the muzzle.
On another note: you want to try one of the longer bullets for your 14 twist Shiloh:
Two choices from Baco for 14 twist 40s are;
403315E and 402415E
JIM403415E.jpg
JIM402415E.jpg
I reviewed the Chamber dimensions of your rifle you had posted on ASSRA forum,
Since you have essentially no freebore, the 402415E, with the short major/base diameter
would be best for your chamber.The bullet will slide up well on to the lands for best concentricity and
It will enable you to load up to 73Plus grains of Swiss 1.5 under that bullet.
I would also suggest using an alloy with some antimony in it to ensure no slumping.
Of course, we could modify it with a slightly longer major/base band
say about 0.200" as a compromise for added insurance on positive engraving with 16+1 alloy and call it a new design.
Arnie
You do not have the required permissions to view the files attached to this post.