spring fun
- bpcr shooter
- Posts: 805
- Joined: Sun Feb 04, 2018 5:30 pm
- Location: Madison, Wi
spring fun
Got to get out of work early today, so I decided to take a trip up to the range and let a few fly. had the typical changing winds Lodi always has but, with no spotter or wind flags I think it was a great afternoon!! One thing....the man silhouette's are getting hard to see at 950yds!! guess Im getting old!
matt
matt
You do not have the required permissions to view the files attached to this post.
NMLRA Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
- Distant Thunder
- Posts: 882
- Joined: Sun Apr 09, 2006 11:46 am
- Location: NE Wisconsin
Re: spring fun
Matt,
The range looks good! I'm looking forward to being there in a week and a half. I hope it's a bit warmer than it has been the first 3 weeks of April, at least up here. It's been in the 20s most mornings with a bitter northwest wind more days than not. A little warmer would be nice. Either way I'll be there.
Thanks for the pictures!
The range looks good! I'm looking forward to being there in a week and a half. I hope it's a bit warmer than it has been the first 3 weeks of April, at least up here. It's been in the 20s most mornings with a bitter northwest wind more days than not. A little warmer would be nice. Either way I'll be there.
Thanks for the pictures!
Jim Kluskens
aka Distant Thunder
aka Distant Thunder
-
- Posts: 8428
- Joined: Wed Oct 12, 2005 10:28 pm
- Location: Not Far enough NW in Illinois
Re: spring fun
looks pretty good to me Matt. It looks like you put some good hits on that feller.
I hope to get to the range tomorrow, snow flurries today so I made some alloy. Hope to get to use it this summer.
I hope to get to the range tomorrow, snow flurries today so I made some alloy. Hope to get to use it this summer.
The reason a dog has so many friends is because he wags his tail instead of his tongue.
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
-
- Posts: 2920
- Joined: Wed Feb 03, 2010 3:21 pm
- Location: Montana
Re: spring fun
What model is your stand ??bpcr shooter wrote: ↑Tue Apr 20, 2021 7:26 pm Go with no spotter or wind flags I think it was a great afternoon!!
matt
I'm trying to decide if the Polecat is worth the extra money.
-
- Posts: 904
- Joined: Fri Jan 18, 2019 3:45 pm
Re: spring fun
Good shooting. I have found the yards are getting longer after 60 years of age.
There are those that talk, and those that act. Make a choice.
- bpcr shooter
- Posts: 805
- Joined: Sun Feb 04, 2018 5:30 pm
- Location: Madison, Wi
Re: spring fun
V2 Polecat. My scope is a bit heavy for it, so I had to make a bracket to bring some of the weight back but other than that it works very well. I was told by some Palma shooters, you can get the cheaper ones that Creemoore sports sells and in a few years you will go buy one of these.....semtav wrote: ↑Tue Apr 20, 2021 8:11 pmWhat model is your stand ??bpcr shooter wrote: ↑Tue Apr 20, 2021 7:26 pm Go with no spotter or wind flags I think it was a great afternoon!!
matt
I'm trying to decide if the Polecat is worth the extra money.
Its really nice, set it for your height (prone or otherwise) and its a one hand operation after that to get on target.
NMLRA Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
- bpcr shooter
- Posts: 805
- Joined: Sun Feb 04, 2018 5:30 pm
- Location: Madison, Wi
Re: spring fun
I am too!! I've been waiting for this shoot since last fall!! I usually like to get out more but with all the shortages of primers and powders its hard to. Its been in the 50's down here lately, this morn is was 28deg but, Im sure it will warm up a bit here in the next week or so. When I got there, there was a nice breeze in my face that all the sudden I could feel on the back of my neck 3 sighters into it. See you in a couple weeks!!!Distant Thunder wrote: ↑Tue Apr 20, 2021 7:44 pm Matt,
The range looks good! I'm looking forward to being there in a week and a half. I hope it's a bit warmer than it has been the first 3 weeks of April, at least up here. It's been in the 20s most mornings with a bitter northwest wind more days than not. A little warmer would be nice. Either way I'll be there.
Thanks for the pictures!
NMLRA Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
-
- Posts: 669
- Joined: Sun May 25, 2003 7:48 pm
- Location: Saint Cloud, MN
Re: spring fun
Thank you bpcr shooter for posting a photo of the Lodi range.
It brings back fond memories. Unfortunately, I will not be able to shoot there again this year.
You will have to pester DT for me, he needs that to do his best.
Keep on hav'n fun!
MikeT
It brings back fond memories. Unfortunately, I will not be able to shoot there again this year.
You will have to pester DT for me, he needs that to do his best.
Keep on hav'n fun!
MikeT
- bpcr shooter
- Posts: 805
- Joined: Sun Feb 04, 2018 5:30 pm
- Location: Madison, Wi
Re: spring fun
OHHHH I WILL!!! Half the fun of giving it out is wondering what you'll get back!
Hope you can make it down for the fall shoot!!
matt
NMLRA Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
-
- Posts: 8428
- Joined: Wed Oct 12, 2005 10:28 pm
- Location: Not Far enough NW in Illinois
Re: spring fun
Well I had some spring fun this morning also
I took the .45-90 for it's final test load with the new lot of Swiss and it was really not a good time with the winds switching like a happy dog's tail, but I got the rounds emptied.
I also took the .40-65 to zero in the scope I mounted on the barrel and I found out that I'm getting old I forgot that I switched the barrel on the CPA from the .40-65 to the .44-100 and noticed the lack of recoil shooting the .40-65 round in the .44-100/2.6 chamber, well now that case is a .44-70 case and a bore full of lead to get cleaned out.
This is one of the problems with a switch barrel rifle when the memory bank starts to fill up.
But the .45-2.4 is ready for Lodi.....I think.
I took the .45-90 for it's final test load with the new lot of Swiss and it was really not a good time with the winds switching like a happy dog's tail, but I got the rounds emptied.
I also took the .40-65 to zero in the scope I mounted on the barrel and I found out that I'm getting old I forgot that I switched the barrel on the CPA from the .40-65 to the .44-100 and noticed the lack of recoil shooting the .40-65 round in the .44-100/2.6 chamber, well now that case is a .44-70 case and a bore full of lead to get cleaned out.
This is one of the problems with a switch barrel rifle when the memory bank starts to fill up.
But the .45-2.4 is ready for Lodi.....I think.
The reason a dog has so many friends is because he wags his tail instead of his tongue.
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
- desert deuce
- Posts: 3900
- Joined: Mon Apr 14, 2008 10:51 pm
- Location: Rio Rico, Arizona
Re: spring fun
I presume pestering DT is a Team Event?
Sometimes you get the chicken, and sometimes you get the feathers!
-
- Posts: 2367
- Joined: Sun Nov 04, 2007 5:29 pm
- Location: Central Texas
- Contact:
Re: spring fun
Kurt’s comments reminded me of a recent story conveyed to me by my BPCR shooting buddy. A friend of his was shooting a rifle chambered for the .270 Win. He loaded a round which required more force than normal to fully chamber it. When fired the recoil was extremely heavy and the bolt required hammering up and back to eject the case. Figuring it was a fluke, he chambered another round which also required excess force to fully chamber. The recoil was just as bad as the 1st firing and the bolt had to be hammered up and back to remove the spent case.
It turns out he was forcing .308 Win cartridges into a .270 Win. chamber. Due to the shorter length of the .308, with sufficient force, it chambered in the .270. No doubt the increased force was necessary to set the bullet back in the case since it would not slide into a .270 throat. When fired the bullet instantly went from .308” down to .277” diameter and one can only imaging the resulting pressure increase. The rifle (I believe it was a Rem. 700 but not sure) was later checked out by a gunsmith who found no obvious damage.
Wayne
It turns out he was forcing .308 Win cartridges into a .270 Win. chamber. Due to the shorter length of the .308, with sufficient force, it chambered in the .270. No doubt the increased force was necessary to set the bullet back in the case since it would not slide into a .270 throat. When fired the bullet instantly went from .308” down to .277” diameter and one can only imaging the resulting pressure increase. The rifle (I believe it was a Rem. 700 but not sure) was later checked out by a gunsmith who found no obvious damage.
Wayne
NRA Life (Benefactor & President's Council) Member, TSRA Life Member, NSSF Member, Author & Publisher of the Browning BPCR book
http://www.texas-mac.com
http://www.texas-mac.com
- bpcr shooter
- Posts: 805
- Joined: Sun Feb 04, 2018 5:30 pm
- Location: Madison, Wi
Re: spring fun
thats the whole point of showing up!!!
NMLRA Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
- bpcr shooter
- Posts: 805
- Joined: Sun Feb 04, 2018 5:30 pm
- Location: Madison, Wi
Re: spring fun
Well dad has a 44-70 being built at shiloh if you wanna get rid of those new cases you formed!!! I hear you though, its getting tougher every year to fully remember everything! I have to start a week or two before and check multiple times or I will forget something!! Heck that was one reason to even go shooting the other day.....just to see if I have it all!!Kurt wrote: ↑Wed Apr 21, 2021 11:59 am Well I had some spring fun this morning also
I took the .45-90 for it's final test load with the new lot of Swiss and it was really not a good time with the winds switching like a happy dog's tail, but I got the rounds emptied.
I also took the .40-65 to zero in the scope I mounted on the barrel and I found out that I'm getting old I forgot that I switched the barrel on the CPA from the .40-65 to the .44-100 and noticed the lack of recoil shooting the .40-65 round in the .44-100/2.6 chamber, well now that case is a .44-70 case and a bore full of lead to get cleaned out.
This is one of the problems with a switch barrel rifle when the memory bank starts to fill up.
But the .45-2.4 is ready for Lodi.....I think.
matt
NMLRA Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
-
- Posts: 2929
- Joined: Mon Feb 20, 2012 7:06 am
- Location: Jersey Shore
Re: spring fun
Doesn't the Polecat base have a threaded hole centered underneath? Something like 3/8-24 or similar? My original Ray-Vin does and thought the Polecat, as well. It is there to make attachment of additional weight simple. Bolt, washer and a chunk of your favorite weight and good to go.
Glenn