Awhile back here on the forum I read something about an applicator of sorts that dry patches for wiping were stored/kept in at the range to prevent the wind from blowing them away while shooting I need to come up with something because I’m always worrying about my open container jar of dry patches going airborne. Any ideas would be really appreciated. The really windy season has just begun here in SE WA State. BTW, I use 3” square patches.
Robert
Dry patch container on the market?
-
- Posts: 3236
- Joined: Thu Apr 14, 2005 8:26 pm
- Location: WA State
Dry patch container on the market?
Beware of the man that owns one rifle.
-
- Posts: 186
- Joined: Wed Aug 31, 2005 5:30 pm
- Location: Granada Hills. Ca.
- Contact:
Re: Dry patch container on the market?
Oencountry You are looking for a patch popper they were sold by Paul Huard aka moezingo. I believe he sold out his supply and was not going to make any more. Search patch popper and you should find a picture that was posted here a while back. Hope this helps.
-
- Posts: 289
- Joined: Tue Oct 08, 2019 8:42 am
- Location: Wyoming
Re: Dry patch container on the market?
There was a vendor set up at the "Q" that made his pop up patch dispenser from square tubing for the guys that cut their own. Just do not recall his name.....unfortunately.
kw
kw
-
- Posts: 3236
- Joined: Thu Apr 14, 2005 8:26 pm
- Location: WA State
Re: Dry patch container on the market?
Sounds good; I’m going to try and make my own. I’ll install a light-tension spring under an inside moveable plate to keep some tension on the patches, cap both ends with square caps, cut an opening to fill and remove individual patches. Thanks for the idea! It sounds doable.
Robert
Beware of the man that owns one rifle.
-
- Posts: 2365
- Joined: Sun Nov 04, 2007 5:29 pm
- Location: Central Texas
- Contact:
Re: Dry patch container on the market?
Tom,Tom Trevor wrote: ↑Tue Oct 26, 2021 10:18 am Oencountry You are looking for a patch popper they were sold by Paul Huard aka moezingo. I believe he sold out his supply and was not going to make any more. Search patch popper and you should find a picture that was posted here a while back. Hope this helps.
I believe Paul is still making the Patch Popper's. See the very recent thread below. BTW, I've been using one for several years and it's great.
http://www.shilohrifle.com/forums/viewt ... =2&t=28379
Wayne
NRA Life (Benefactor & President's Council) Member, TSRA Life Member, NSSF Member, Author & Publisher of the Browning BPCR book
http://www.texas-mac.com
http://www.texas-mac.com
-
- Posts: 506
- Joined: Tue Apr 08, 2014 11:39 am