Motor Honey
- BlackJack
- Posts: 71
- Joined: Wed Jul 17, 2013 9:34 am
Motor Honey
Hello shooters ! Over last 50+ yrs of reloading I've used different makes of case lube for sizing some good some not so good. Today I sized about 50 of my Jamison 45-100 cases and tried a substance called "Motor Honey". It looks like and flows like honey and just takes alittle bit (it goes along way) and it worked like a champ! I had expanded these cases awhile back to fit .458 GG bullets and it took some forcing to size them back down. So, after a friend suggested had I ever tried the Motor Honey I replied no! Well I got some and it works! I may put a touch of it on the patched bullets to help in hand seating to protect the patch paper. Anyone else ever used it?
-
- Posts: 442
- Joined: Tue Jun 16, 2015 10:53 am
Re: Motor Honey
I had a good friend years ago who used STP as a case lube. Worked great. I use RCBS lube and it is about the same consistancy as STP. I keep telling myself I should try STP. I'm guessing that Motor Honey is probably about the same stuff.
George
George
-
- Posts: 161
- Joined: Fri Jan 18, 2019 3:58 pm
Re: Motor Honey
I have been using STP for over 40 years. It is a bit messy and if you slightly over apply it likes to dimple the case. but I still am using the original pint bottle it goes a long way.
Charles
Charles
-
- Posts: 289
- Joined: Tue Oct 08, 2019 8:42 am
- Location: Wyoming
Re: Motor Honey
I have a tub of pure lanolin which is an ingredient in my bullet lube. It works very well as a case sizing/reforming lube, it also washes off easily too. It needs a very thin wipe on the case to avoid wrinkles, a 2 stage size approach works.
kw
kw
-
- Posts: 331
- Joined: Tue Apr 24, 2012 10:47 am
- Location: California
Re: Motor Honey
Lanolin oil mixed with denatured alcohol in a spray bottle works well for me. It separates out so just need to shake it well before spraying on the cases - a little goes a long way. Mix at approximately 15 parts alcohol to 1 part lanolin oil.
-
- Posts: 210
- Joined: Fri Nov 26, 2004 7:17 pm
- Location: Oregon
Re: Motor Honey
I've been using Imperial sizing wax for cases that I have to do heavy reforming to make them fit oddball old single shots I own. Many decades of using it, and it's still the best, and still working on my first can too! It takes very little, and just apply it with my fingers to the case. No mess, or sticky fingers.
- powderburner
- Posts: 2993
- Joined: Sat May 24, 2003 12:23 am
- Location: elko nv.
Re: Motor Honey
I bought a new can of imperial to replace my origional, it was green tinted and had rcbs on the tin. I broke two shell holders forming winchester cases to 40-65. I was unimpressed with the new formula. The old stuff was really good.
Dean Becker
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T
-
- Posts: 175
- Joined: Thu Feb 16, 2023 3:08 pm
Re: Motor Honey
I have been using Hornady case lube for years and a tube last a long time just started on my secound tube and have been loading for 30 plus years
-
- Posts: 6064
- Joined: Sat Feb 07, 2009 9:02 am
- Location: Freetown, Indiana
Re: Motor Honey
Been using the Hornaday One Shot spray for about 5 or 6 years. Not as cost effective as the RCBS lube and pad that I used for 45 years but so much easier. Just a little spray and you don't have to wipe it off after sizing.
Woody
Woody
Richard A. Wood
If you are surrounded. You are in a target rich environment.
If you are surrounded. You are in a target rich environment.
-
- Posts: 2365
- Joined: Sun Nov 04, 2007 5:29 pm
- Location: Central Texas
- Contact:
Re: Motor Honey
Another vote for Hornady spray lube which I've been using for many years, ever since I started BPCR. As Woody noted it's easy (nothing is faster that I've tried) & there's no need to clean the cases afterwards.
Wayne
Wayne
NRA Life (Benefactor & President's Council) Member, TSRA Life Member, NSSF Member, Author & Publisher of the Browning BPCR book
http://www.texas-mac.com
http://www.texas-mac.com
-
- Posts: 210
- Joined: Fri Nov 26, 2004 7:17 pm
- Location: Oregon
Re: Motor Honey
For normal reloading that doesn't require case forming I also have used Hornady's One Shot for many years. I love it, and found a bunch at our local gun show for less than half price, so bought the whole case he had. Set for life now. At least whatever years I have left!!