Need a .22 Ballard Trigger Spring
-
- Posts: 1517
- Joined: Sun Jul 04, 2010 8:55 am
- Location: GA.
Need a .22 Ballard Trigger Spring
I have a friend that needs a spring for the double set triggers on a .22 Ballard. He and two younger shooters are going to Raton in a couple weeks to compete. All plans and reservations will be lost if he can not come up with a spring. Thanks in advance for any help on getting a spring, or someone who can make one.
Normal isn't coming back, but Jesus is.
-
- Posts: 3817
- Joined: Wed Sep 25, 2002 1:22 pm
- Location: between No Where & No Place, WA
Re: Need a .22 Ballard Trigger Spring
Try Wyoming Armory. A few years ago, they installed a new firing pin in my Cody-Ballard.
www.wyomingarmory.com
www.wyomingarmory.com
Grand PooBah
WA ST F. E. S.
In real life may you be the bad ass that you claim to be on social media....
WA ST F. E. S.
In real life may you be the bad ass that you claim to be on social media....
-
- Posts: 1517
- Joined: Sun Jul 04, 2010 8:55 am
- Location: GA.
Re: Need a .22 Ballard Trigger Spring
No luck. Didn't have one.
Normal isn't coming back, but Jesus is.
-
- Posts: 264
- Joined: Thu Nov 20, 2014 10:44 am
- Location: cheyenne, wy
Re: Need a .22 Ballard Trigger Spring
Try Mike Bassett. 405 315-0590
-
- Posts: 1078
- Joined: Thu May 13, 2010 12:32 pm
- Location: Stephens City, VA
Re: Need a .22 Ballard Trigger Spring
Which spring? The front or rear trigger?
"Perfection consists not so much in doing extraordinary things as in doing ordinary things extraordinarily well"
-
- Posts: 1517
- Joined: Sun Jul 04, 2010 8:55 am
- Location: GA.
Re: Need a .22 Ballard Trigger Spring
Rear trigger John, the spring mounts on the left side of the bottom plate. It has a smaller piece on the end that makes a 90 degree turn and applies pressure on the rear trigger.
Normal isn't coming back, but Jesus is.
-
- Posts: 1078
- Joined: Thu May 13, 2010 12:32 pm
- Location: Stephens City, VA
Re: Need a .22 Ballard Trigger Spring
Can't help with that one. I've got springs for the front trigger.
"Perfection consists not so much in doing extraordinary things as in doing ordinary things extraordinarily well"
-
- Posts: 1517
- Joined: Sun Jul 04, 2010 8:55 am
- Location: GA.
Re: Need a .22 Ballard Trigger Spring
Found one. Keith Kilby at Wyoming Armory had one, he built this rifle. Thanks for all the help guys.
Normal isn't coming back, but Jesus is.
-
- Posts: 1517
- Joined: Sun Jul 04, 2010 8:55 am
- Location: GA.
Re: Need a .22 Ballard Trigger Spring
There was some miscommunication, we still don't have a spring. Still looking.
Normal isn't coming back, but Jesus is.
-
- Posts: 264
- Joined: Thu Nov 20, 2014 10:44 am
- Location: cheyenne, wy
Re: Need a .22 Ballard Trigger Spring
Call Mike Bassett, he told me he would make one.
-
- Posts: 1517
- Joined: Sun Jul 04, 2010 8:55 am
- Location: GA.
-
- Posts: 451
- Joined: Wed Dec 03, 2014 5:00 pm
- Location: Florida
Re: Need a .22 Ballard Trigger Spring
Spring is made, fitted and tested. It’s on its way back to the owner…
Tom Klinger
Tom Klinger
-
- Posts: 1517
- Joined: Sun Jul 04, 2010 8:55 am
- Location: GA.
Re: Need a .22 Ballard Trigger Spring
Man!! You are fast Tom, I know Mike is happy. We need to keep you busy.
Normal isn't coming back, but Jesus is.