KAL case stretcher
-
- Posts: 38
- Joined: Thu Jul 01, 2021 5:31 am
KAL case stretcher
I'm looking for some opinions on the KAL case stretcher. I'm considering ordering one due to the lack of 45-100 brass, I have plenty of 45-90 brass and I'm concerned that the stretching of the case won't make up the difference or have a case life issue due to thinning. Any help or guidance would be appreciated.
- powderburner
- Posts: 3024
- Joined: Sat May 24, 2003 12:23 am
- Location: elko nv.
Re: KAL case stretcher
Baco used 2.6 cases to make 2.8 for years. And it worked fine. Starline 90 brass is thick so it should be aboutthe same.
Dean Becker
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T
-
- Posts: 3001
- Joined: Wed Feb 03, 2010 3:21 pm
- Location: Montana
Re: KAL case stretcher
The KAL stretcher will turn a 2.4 case into a 2.45 case, but it won't turn a 2.4 case into a 2.6 case.
You need a lathe or something else to do that.
MDeland could have helped you there but he no longer comes here.
You need a lathe or something else to do that.
MDeland could have helped you there but he no longer comes here.
- powderburner
- Posts: 3024
- Joined: Sat May 24, 2003 12:23 am
- Location: elko nv.
Re: KAL case stretcher
What if you cut down some of the stretched 2.8 starline. Back to where they were?
Dean Becker
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T
- JonnyV
- Posts: 648
- Joined: Mon Jun 28, 2021 3:52 pm
- Location: Living in a van down by the river eatin’ Govt cheese
- Contact:
Re: KAL case stretcher
In going back and looking at my 45-90 cases now that they have a couple firings on them, I'm noticing a lot of cases that are up to .010" short of 2.4". I have not resized any brass or trimmed it either. I got one of these case stretchers and after watching the video a couple times and trying it out, it seems easy enough to use.
My question is this: Once I stretch out my brass, I will need to trim it back to uniform length. My chamber measures 2.410". Is there any advantage to trimming the brass a little long, say 2.405", or, should I just stick with 2.40"?
Thanks!!
My question is this: Once I stretch out my brass, I will need to trim it back to uniform length. My chamber measures 2.410". Is there any advantage to trimming the brass a little long, say 2.405", or, should I just stick with 2.40"?
Thanks!!
-
- Posts: 97
- Joined: Wed Mar 25, 2020 12:42 pm
Re: KAL case stretcher
Johnny,
After reading numerous posts in this forum I have decided to trim my brass to .005” short of the max case length for both pp & gg bullets. My 40-65 gets trimmed to 2.110”.
FWIW,
Steve
After reading numerous posts in this forum I have decided to trim my brass to .005” short of the max case length for both pp & gg bullets. My 40-65 gets trimmed to 2.110”.
FWIW,
Steve
-
- Posts: 97
- Joined: Wed Mar 25, 2020 12:42 pm
Re: KAL case stretcher
The advantage is no paper or lead rings in the chamber to cause other problems. My 40-50 sbn was about.040” short and I had little fingernail like clippings of lead when I swabbed the chamber between shots.
FWIW,
Steve
FWIW,
Steve
-
- Posts: 69
- Joined: Thu May 29, 2014 11:28 am
Re: KAL case stretcher
I'm currently streaching 30-40 kraig Winchester brass from 2.270 to 2.520 in one pass with a k toolJeff Michel wrote: ↑Wed Oct 11, 2023 7:33 am I'm looking for some opinions on the KAL case stretcher. I'm considering ordering one due to the lack of 45-100 brass, I have plenty of 45-90 brass and I'm concerned that the stretching of the case won't make up the difference or have a case life issue due to thinning. Any help or guidance would be appreciated.
-
- Posts: 8466
- Joined: Wed Oct 12, 2005 10:28 pm
- Location: Not Far enough NW in Illinois
Re: KAL case stretcher
Mike had a lot of good shop work posts.
Wayne (TexasMac's) had a lot of foresight saving Mikes nibbing cases. They can be stretched to a good length if it's done properly.
TNX. Wayne for your great web site.
http://www.texas-mac.com/Lengthening_Sh ... amber.html
The reason a dog has so many friends is because he wags his tail instead of his tongue.
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill