Source for .50 cal press-mounted wad cutter

Talk with other Shiloh Sharps shooters.

Moderators: Kirk, Lucinda

Post Reply
TexasMac
Posts: 2369
Joined: Sun Nov 04, 2007 5:29 pm
Location: Central Texas
Contact:

Source for .50 cal press-mounted wad cutter

Post by TexasMac »

Does anyone make a .50 cal press-mounted wad cutter? I have Fred Cornell cutters for .40 & .45 but need a .50, new or used.

Wayne
NRA Life (Benefactor & President's Council) Member, TSRA Life Member, NSSF Member, Author & Publisher of the Browning BPCR book
http://www.texas-mac.com
rkaires
Posts: 24
Joined: Thu Jul 21, 2022 9:10 am
Location: Dingmans Ferry, PA

Re: Source for .50 cal press-mounted wad cutter

Post by rkaires »

https://www.buffaloarms.com/515-punch-50pmwp.html

Try Buffalo Arms for backorder status.
TexasMac
Posts: 2369
Joined: Sun Nov 04, 2007 5:29 pm
Location: Central Texas
Contact:

Re: Source for .50 cal press-mounted wad cutter

Post by TexasMac »

rkaires wrote: Sat May 18, 2024 6:08 am https://www.buffaloarms.com/515-punch-50pmwp.html

Try Buffalo Arms for backorder status.
Thanks. It never dawned on me to check Buffalo Arms.

Wayne
NRA Life (Benefactor & President's Council) Member, TSRA Life Member, NSSF Member, Author & Publisher of the Browning BPCR book
http://www.texas-mac.com
bobw
Posts: 3887
Joined: Tue Nov 23, 2004 12:52 pm

Re: Source for .50 cal press-mounted wad cutter

Post by bobw »

I 've had a 44 cal on backorder from BACO for over 2 years now and you want a 50? Good luck. Gussy used to make 50's I have one of his. I'll see him at the Q in 3 weeks and I'll ask him about it. Bobw
bobw
kwilliams
Posts: 295
Joined: Tue Oct 08, 2019 8:42 am
Location: Wyoming

Re: Source for .50 cal press-mounted wad cutter

Post by kwilliams »

Press wad punches are a simple lathe project and allow you to make any diameter you want. Find a buddy who has one. The asm. can be a 2 pc's and silver soldered together. I would not wait on a supplier if I needed one. Start with a 7/8 bolt. and go from there.
kw
Post Reply