1874 Hammer screw loosens
-
- Posts: 53
- Joined: Sat Oct 02, 2010 11:02 am
- Location: Western North Dakota
1874 Hammer screw loosens
Before I get out the welder and tack weld the blasted thing into place, anyone have a fix for keeping the screw holding the hammer to the tumbler tight. I have tried Blue Lock-Tight and have thought about a thin brass shim stock washer. screw constantly loosens.
-
- Posts: 2935
- Joined: Wed Aug 24, 2005 5:01 pm
- Location: 25 miles west of Great Falls, Montana
Re: 1874 Hammer screw loosens
Did you degrease the screw, and the threads in the tumbler, before applying the LocTite?
Retired...twice. Now, raisin' cows and livin' on borrowed time...
-
- Posts: 3817
- Joined: Wed Sep 25, 2002 1:22 pm
- Location: between No Where & No Place, WA
Re: 1874 Hammer screw loosens
Call Shiloh on Monday?
Grand PooBah
WA ST F. E. S.
In real life may you be the bad ass that you claim to be on social media....
WA ST F. E. S.
In real life may you be the bad ass that you claim to be on social media....
- Lumpy Grits
- Posts: 7680
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: 1874 Hammer screw loosens
Did you really shake the bottle of loctite before use? You get your best results if you do.
Remove the screw, and with a Q-tip that's damp with IPA clean the inside thread area and apply just a drop of 'blue' again to the screw. Let it set-up overnight in a warm area.
Good luck,
Gary
Remove the screw, and with a Q-tip that's damp with IPA clean the inside thread area and apply just a drop of 'blue' again to the screw. Let it set-up overnight in a warm area.
Good luck,
Gary
"Hav'n you along, is like loose'n two good men"
-
- Posts: 334
- Joined: Thu Oct 16, 2008 9:22 am
- Location: St. Paul, MN
Re: 1874 Hammer screw loosens
Gary,
Have to expose my ignorance here......what is IPA ? Similar to DNA (denatured alcohol)?
I noticed mine was loose the last time out shooting so might have to take this suggestion.
Thanks!
Tom
Have to expose my ignorance here......what is IPA ? Similar to DNA (denatured alcohol)?
I noticed mine was loose the last time out shooting so might have to take this suggestion.
Thanks!
Tom
-
- Posts: 334
- Joined: Thu Oct 16, 2008 9:22 am
- Location: St. Paul, MN
Re: 1874 Hammer screw loosens
Gary,
Have to expose my ignorance here......what is IPA ? Similar to DNA (denatured alcohol)?
I noticed mine was loose the last time out shooting so might have to take this suggestion.
Thanks!
Tom
Have to expose my ignorance here......what is IPA ? Similar to DNA (denatured alcohol)?
I noticed mine was loose the last time out shooting so might have to take this suggestion.
Thanks!
Tom
- Lumpy Grits
- Posts: 7680
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: 1874 Hammer screw loosens
IPA is Isopropyl Alcohol. I find it to be a better cleaner than DNA.
G.
G.
"Hav'n you along, is like loose'n two good men"
- alfajim
- Posts: 227
- Joined: Mon Mar 14, 2016 12:16 pm
Re: 1874 Hammer screw loosens
The best cleaner to use is acetone it dries clean no film there is also a locktite primer in little spray cans that will set the lock tite off for full holding power.
FWIW: red is the next holding power up but you have to use heat to break it loose to remove the screw so not recommended for use there, not good on the bluing
Jim
FWIW: red is the next holding power up but you have to use heat to break it loose to remove the screw so not recommended for use there, not good on the bluing
Jim
- alfajim
- Posts: 227
- Joined: Mon Mar 14, 2016 12:16 pm
Re: 1874 Hammer screw loosens
Tom,TAA wrote:Gary,
Have to expose my ignorance here......what is IPA ? Similar to DNA (denatured alcohol)?
I noticed mine was loose the last time out shooting so might have to take this suggestion.
Thanks!
Tom
DNA (denatured alcohol) is actually ethanol (booze) poisoned with methanol (wood alcohol) so as to make it undrinkable for medical use.
IPA (isopropyl alcohol) is commonly used as a deicing fluid and as a paint thinner it is an oily alcohol and less corrosive to metals.
Jim
-
- Posts: 53
- Joined: Sat Oct 02, 2010 11:02 am
- Location: Western North Dakota
Re: 1874 Hammer screw loosens
Yes.montana charlie wrote:Did you degrease the screw, and the threads in the tumbler, before applying the LocTite?
-
- Posts: 53
- Joined: Sat Oct 02, 2010 11:02 am
- Location: Western North Dakota
Re: 1874 Hammer screw loosens
No.Lumpy Grits wrote:Did you really shake the bottle of loctite before use? You get your best results if you do.
Remove the screw, and with a Q-tip that's damp with IPA clean the inside thread area and apply just a drop of 'blue' again to the screw. Let it set-up overnight in a warm area.
Good luck,
Gary
-
- Posts: 53
- Joined: Sat Oct 02, 2010 11:02 am
- Location: Western North Dakota
Re: 1874 Hammer screw loosens
Thanks to all for your suggestions/advice. I will act on them and on Ray's suggestion as well. I have fought this problem for years and am tired of it. Not going to take it anymore. It interferes with my enjoyment of my low scores.Ray Newman wrote:Call Shiloh on Monday?
-
- Posts: 8428
- Joined: Wed Oct 12, 2005 10:28 pm
- Location: Not Far enough NW in Illinois
Re: 1874 Hammer screw loosens
If you want to get a red Loctite screw loose just heat the screwdriver tip and hold it on the screw before you twist it. don't put the flame on the screw.
I had the screws on my forearm come loose after a few shots fired and used blue Loctite but when the barrel got hot they came loose again. Red held them till I wanted to take the wood off to dry it after a rain. A hot screw driver worked fine.
I had the screws on my forearm come loose after a few shots fired and used blue Loctite but when the barrel got hot they came loose again. Red held them till I wanted to take the wood off to dry it after a rain. A hot screw driver worked fine.
The reason a dog has so many friends is because he wags his tail instead of his tongue.
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
- Lumpy Grits
- Posts: 7680
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: 1874 Hammer screw loosens
The tip of a soldering iron, works even better.
Dan-What did Shiloh say?
G.
Dan-What did Shiloh say?
G.
"Hav'n you along, is like loose'n two good men"
-
- Posts: 2789
- Joined: Mon Jan 21, 2008 7:36 pm
Re: 1874 Hammer screw loosens
If blue Locktite won't get the job done, then there is something wrong with your lock or hammer or both. I'm wondering if the tenon of the tumbler does not mate well with the hammer so it rocks a bit when you operate it. That might loose that screw. If it is fit correctly, then the hammer shouldn't be putting hardly any rotational load on those threads and nothing would move. Seems like an odd problem if Loctite won't get it done.