Shiloh Rifle Forums

8iowa

My wife never said a thing about lube making in the kitchen , made many a sticks of lube for the sizer which only required the use of a double boiler, it all came crashing down a couple of weeks back . I went and made some lube for my revolvers ( FELIX LUBE ) which requires enough heat to make the ingredientes smoke for half an hour . Ten minutes into the process my wife and son started to make comments about not being able to see well because of the smoke , I opened the windows but that was not satisfactory , lube making was cut short and a comment was made that maybe next time I could do this out side , at least she was polite about it . One more thing she did not like it was the melted wax she found on the stove and the floor I think that sealed it for me.

RR

Yeah, I know what you mean, but it's kinda hard to do outside when the wind chill is like -40 or so!!

For those of you who may want to try dip lubing - which I think is a great way to easily and cheaply lube bullets already at the diameter you like - try melting a modicum of lube in a tuna fish can on a coffe cup warmer. Those heater/warmers are available at many drug type stores (you know, the ones which also sell everything else other than tires). They keep a cup of coffee at drinking temperature, which is just about the perfect point for melting bullet lube without smoking it. The one I have cost me all of $7.95 + that darned sales tax. Good luck from a formerly reformed, now unrepentant, lubaholic.

KEN

Windchill in the 40's ?? Now that would be nice to have it that warm !!


Smokin

Have not done any dipping , it just seems it would be messy ?? Might have to try it just to say I did . It's more time consuming doing it through the sizer but the bullets are so clean and neat . Have not done the pan thing either , maybe will have to try that also .

RR

I shot some pure lead PP bullets form Montanna Bullet works, I thought they really shot great. I may hunt with them if I ever get a -90 or -110.

Hey Ranger Rick, you need to move to South Texas, it's always warm down here. And the tequilla is gooooooooooooooooooood.

Hi,
Thanks for the help, I’ve sent my Lyman 457193 back and hope to get a replacement soon. I’m also going to try a Saeco 500 grn. flat point for hunting.
Monty

Monty, I've been thinking about that mold from Saeco myself. Let us know haw it works out.

Ken

I know about that warm weather yall have down there , I grew up in a town in Texas called Lewisville , just outside of Denton-Fortworth area . I left there in 77 when I was 12 . I think what I miss the most about Texas is the catfish , love those channel cats . I know that I should love the salmon and halibut here !! I do but not as much as the fat cats . Matter of fact I still have about 100 pounds of kings and silvers in the freezer and just as much halibut and the salmon are already running again . I also miss the heat .

RR

Just an update, I ordered the Saeco 500 grn flat point mould and gave it a try. It cast oversized especially at the nose diameter, and the bullets would not chamber in my rifle. Nose diameter went from .450 - .452 depending on alloy used. The .450 would work sort of if I cleaned between shots, so I returned it. I had sent my Lyman 457193 mould back because it was casting way undersized. Lyman returned it having reamed it out. When I tried it out it was better, but still under sized. At this point I got mad and decided to fix the mould myself. I used a dremel tool and a small polishing stone I custom shaped to fit the mould groves. The “stone” is made of rubber with polishing compound in it. I would polish, then cast, polish, cast. Took the better part of a day, but finally have a mould that makes the right sized bullet. It’s not perfect, but my rifle loves it. My groups went from 2 feet down to 2 inches at 100 yards. This is as good as my eyes will let me shoot anyway. I’m putting in an order with Steve Brooks today and hope to have a mould I don’t have to mess with.
Monty

Thanks for the update Monty, I think I will pass on the Saeco mold. I do have a Lyman mold for the 457132 that throws a perfect bullet I think, the nose is .448 and the bands are .459, just about perfect in my humble opinion for my 45-70. I have come to the conclusion that you have though, I'm going to get a Steve Brooks mold for the 50-70 to hunt with and a Paul Jones 540 grain to shoot silhouette in the 45-70.

RANGER RICK:

I know right where Lewisville, Tx is. I live in Frisco, right next door. If your ever in the area, there is still a mess of those Channel Cat's around in the local restaurants. If I ever get them to eatin size at the "Farm", I'd be happy to treat.

Texas Shooter

Just come down to Choke Canyon State Park, we catch them by the hundreds. Not all Channels, but cat anyway.

Quote: " besides a PP in a 45/110 is super cool!!!

keith"

Matthew seemed to like them.