sharps percussion nipple wrench
- kenny sd
- Posts: 382
- Joined: Mon Jan 06, 2020 9:24 am
- Location: florida
sharps percussion nipple wrench
I have an original sharps 1863 percussion carbine. I'd like to find a nipple wrench to fit.
any ideas??
thanks..Ken
any ideas??
thanks..Ken
-
- Posts: 781
- Joined: Wed Jun 01, 2005 8:51 pm
- Location: Patton State Hospital
Re: sharps percussion nipple wrench
I would try Dixie Gunworks.
Dennis
Dennis
"40 knots, no smoke"
"By God Woodrow; it’s been quite a party ain’t it?”
"By God Woodrow; it’s been quite a party ain’t it?”
-
- Posts: 442
- Joined: Tue Jun 16, 2015 10:53 am
Re: sharps percussion nipple wrench
If you don't need to be "authentic" a 1/4" open end will work fine, maybe even better.
George
George
- kenny sd
- Posts: 382
- Joined: Mon Jan 06, 2020 9:24 am
- Location: florida
Re: sharps percussion nipple wrench
Yeah, I have the open end wrench, but it's a pain to use. what did they use in the CW?
-
- Posts: 5
- Joined: Tue Oct 25, 2016 2:45 pm
Re: sharps percussion nipple wrench
check with lodgewood, pretty sure he has them
- kenny sd
- Posts: 382
- Joined: Mon Jan 06, 2020 9:24 am
- Location: florida
Re: sharps percussion nipple wrench
good thought but nope....he has the 50 70 type, but I would like the percussion type.
-
- Posts: 5
- Joined: Tue Oct 25, 2016 2:45 pm
Re: sharps percussion nipple wrench
S & S firearms may have them
-
- Posts: 38
- Joined: Mon Oct 02, 2017 2:46 pm
Re: sharps percussion nipple wrench
I got mine at Track of the Wolf. I did have to adjust it a bit. Had to file it a little wider than it came.
Happy Shooting!!! ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
-
- Posts: 21
- Joined: Tue Feb 15, 2022 2:18 pm
Re: sharps percussion nipple wrench
I got a musket nipple wrench by Ted Cash. It is slightly undersized. It fit 2 out of 3 of my Sharps. 5 minutes work polishing it with a Dremel tool and works fine. It fits the block.
-
- Posts: 332
- Joined: Thu Nov 11, 2010 9:45 pm
- Location: N. CA
Re: sharps percussion nipple wrench
I have a muzzle loading rifle that I use a 1/4” drive socket and an Allen wrench that fits the socket. Doesn’t round off the corners of the nipple.