Shiloh Rifle Forums

I have a friend that needs a spring for the double set triggers on a .22 Ballard. He and two younger shooters are going to Raton in a couple weeks to compete. All plans and reservations will be lost if he can not come up with a spring. Thanks in advance for any help on getting a spring, or someone who can make one.

Try Wyoming Armory. A few years ago, they installed a new firing pin in my Cody-Ballard.

www.wyomingarmory.com

No luck. Didn't have one.

Try Mike Bassett. 405 315-0590

Which spring? The front or rear trigger?

Rear trigger John, the spring mounts on the left side of the bottom plate. It has a smaller piece on the end that makes a 90 degree turn and applies pressure on the rear trigger.

Can't help with that one. I've got springs for the front trigger.

Found one. Keith Kilby at Wyoming Armory had one, he built this rifle. Thanks for all the help guys.

There was some miscommunication, we still don't have a spring. Still looking.

Call Mike Bassett, he told me he would make one.

Thanks

Spring is made, fitted and tested. It’s on its way back to the owner…
Tom Klinger

Man!! You are fast Tom, I know Mike is happy. We need to keep you busy.