Tried using my 22LR insert I purchased from Shiloh 2 weeks ago, insert went into the bore just fine, but the cartridge case adapter hung up at 3/8" out, and it would not budge for love nor money. I'm going to contact Crossno tomorrow but I thought I would ask here and see if anyone else had run into this, or if there were any suggestions?
Dave
Shiloh 45 2.1"
Crossno Liner
-
- Posts: 265
- Joined: Mon Mar 09, 2009 4:53 am
- Location: New Mexico
-
- Moderator
- Posts: 2149
- Joined: Fri Sep 20, 2002 7:47 pm
- Location: Big Timber
Re: Crossno Liner
It should go right in. In the early days I had to in a lathe file down the section just before the rim to make a few of them go.
-
- Posts: 265
- Joined: Mon Mar 09, 2009 4:53 am
- Location: New Mexico
Re: Crossno Liner
In the interest of me not messing anything up, I am going to send it back and get it swapped out. I thought about trying to thin the case a little with Emory cloth, but this will be easier.
Dave
Dave
-
- Posts: 265
- Joined: Mon Mar 09, 2009 4:53 am
- Location: New Mexico
Re: Crossno Liner
A letter of thanks to Lucinda for taking care of me! Received the replacement Friday, test fit 5 minutes later, perfect! Shot it today, took a bit to get windage centered up, but it shot the Federal value pack well at 25 yards. Next is 50 yards and a better target to shoot at. Kirk, thanks for being here, appreciate it more than you know!
Dave
Dave
-
- Posts: 265
- Joined: Mon Mar 09, 2009 4:53 am
- Location: New Mexico
Re: Crossno Liner
Dave
You do not have the required permissions to view the files attached to this post.
- bpcr shooter
- Posts: 842
- Joined: Sun Feb 04, 2018 5:30 pm
- Location: Madison, Wi
Re: Crossno Liner
Lots of guys I shoot with use SK Longrange match with very good success. I've used lots of 10X with good success. I recently switched to Norma Extreme, it's proving to be even better.
Matt
Matt
NMLRA Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member