I have a 74 on order for the 40 70 SS .
I have a number of cases and would like to trim them ahead of time.
I note the correct length is 2.5 normally.
Is this the length of the Shiloh 40 70 SS chamber?
The brass I have is JBA marked 40 70 SS. and I hope it works.
Thanks...Ken
40 70 SS length
-
- Posts: 506
- Joined: Tue Apr 08, 2014 11:39 am
Re: 40 70 SS length
Call Shiloh and do not trim them to the exact length until after the reloads have been fireformedIs this the length of the Shiloh 40 70 SS chamber?
Regards
John
John
- kenny s
- Posts: 775
- Joined: Sat Nov 07, 2015 8:14 am
- Location: Venice FL
Re: 40 70 SS length
thanks. that is what I planned anyway.
Ken
Ken
- kenny s
- Posts: 775
- Joined: Sat Nov 07, 2015 8:14 am
- Location: Venice FL
Re: 40 70 SS length
thanks. that is what I planned anyway.
Ken
Ken
- kenny s
- Posts: 775
- Joined: Sat Nov 07, 2015 8:14 am
- Location: Venice FL
Re: 40 70 SS length
thanks. that is what I planned anyway.
Ken
Ken
- bucksnort
- Posts: 553
- Joined: Sun Oct 05, 2003 8:50 pm
- Location: Vancouver, WA
Re: 40 70 SS length
I too am considering a rebarrel project into a .40-70 ss. I am also planning to use Hornady .405 Win brass. I understand there is a difference in the dimensions of the rim? When I do order the barrel, should I let Shiloh know the brass I'll be using? Thanks. ED