FIXIN TO BE A SHILOH OWNER
-
- Posts: 2783
- Joined: Tue Jun 23, 2009 6:16 pm
Re: FIXIN TO BE A SHILOH OWNER
You want the Norma .45 Basic in 2.88" length.
Chris.
Chris.
- Cm1green
- Posts: 54
- Joined: Wed Nov 15, 2017 1:13 pm
- Location: Colorado Springs, CO
- Contact:
Re: FIXIN TO BE A SHILOH OWNER
Thank you sir found some
1. “The difficult we do now the impossible takes just a little longer”
2. “CAN DO”
2. “CAN DO”
- Cm1green
- Posts: 54
- Joined: Wed Nov 15, 2017 1:13 pm
- Location: Colorado Springs, CO
- Contact:
Re: FIXIN TO BE A SHILOH OWNER
Hey all have a new question I am looking at lubrisizers or lee’s Sizing die set. So if I am going to size cast bullets and paper patch them what sizer diameter do I need .457 and at .457 does this still give me enough room to paper patch?
1. “The difficult we do now the impossible takes just a little longer”
2. “CAN DO”
2. “CAN DO”
- Lumpy Grits
- Posts: 7686
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: FIXIN TO BE A SHILOH OWNER
I shoot my bullets 'as-cast' and pan lube.
Order a quality mould(Brooks, BACO)helps here.
Gary
Order a quality mould(Brooks, BACO)helps here.
Gary
"Hav'n you along, is like loose'n two good men"
-
- Posts: 2783
- Joined: Tue Jun 23, 2009 6:16 pm
Re: FIXIN TO BE A SHILOH OWNER
If you want to shoot paper patched bullets out of that rifle you should try a Buffalo Arms "money" bullet that patches to bore diameter ( 0.450" or 0.449" in a bull barrel rifle ).
It's best to get a dedicated paper patch mold sized properly. I've used molds as small as 0.443" ( patched with 9lb Esleeck paper from Buffalo Arms ) and as large as 0.446" patched with Seth Cole 8 lb ( 55W ) paper. My bull barreled rifle uses a 0.444" bullet with 8 lb paper, but a regular heavy weight barrel has a slightly larger bore and will likely want a 0.445" or 0.446" bullet.
You can shoot them with lube cookies ( see Orville Loomer's book that Shiloh sells, or Randy Wright's book on the subject.
Or you can shoot them without lube wads. Read anything and everything that Kenny Wasserburger has written on shooting paper patched bullets in the .45 2-7/8".
Or, if you want to just shoot "naked" bullets I can say that my .45 2-7/8 likes a 16:1 BACO 459535M lubed with SPG over 93gr of Swiss 1.5. In my rifle that particular 0.458" bullet is a perfect slip fit in a Norma .45 case.
Chris.
It's best to get a dedicated paper patch mold sized properly. I've used molds as small as 0.443" ( patched with 9lb Esleeck paper from Buffalo Arms ) and as large as 0.446" patched with Seth Cole 8 lb ( 55W ) paper. My bull barreled rifle uses a 0.444" bullet with 8 lb paper, but a regular heavy weight barrel has a slightly larger bore and will likely want a 0.445" or 0.446" bullet.
You can shoot them with lube cookies ( see Orville Loomer's book that Shiloh sells, or Randy Wright's book on the subject.
Or you can shoot them without lube wads. Read anything and everything that Kenny Wasserburger has written on shooting paper patched bullets in the .45 2-7/8".
Or, if you want to just shoot "naked" bullets I can say that my .45 2-7/8 likes a 16:1 BACO 459535M lubed with SPG over 93gr of Swiss 1.5. In my rifle that particular 0.458" bullet is a perfect slip fit in a Norma .45 case.
Chris.
- Cm1green
- Posts: 54
- Joined: Wed Nov 15, 2017 1:13 pm
- Location: Colorado Springs, CO
- Contact:
Re: FIXIN TO BE A SHILOH OWNER
Found the NORMA Basic 45 cal 2.888 brass at Huntington die specialties out of Oroville, CA for $30.00 for 20 cases and available for those who need brass. I know either have everything ordered and on the way or already here to make greased bullets and sized lubed and put in the cases with powder and wads. For at least 60 rounds. The adventure is starting to come together.
1. “The difficult we do now the impossible takes just a little longer”
2. “CAN DO”
2. “CAN DO”
-
- Posts: 1885
- Joined: Tue Oct 29, 2002 9:33 pm
- Location: Woodlawn,Texas
Re: FIXIN TO BE A SHILOH OWNER
I hope you got more than 20 cases. 150 or 200 would be a good start. rdnck.
Chairman, Phd
Caddo Lake Chapter
FES
Charter Member FBASS
Charter Member OGANT
Caddo Lake Chapter
FES
Charter Member FBASS
Charter Member OGANT
- Cm1green
- Posts: 54
- Joined: Wed Nov 15, 2017 1:13 pm
- Location: Colorado Springs, CO
- Contact:
Re: FIXIN TO BE A SHILOH OWNER
Started with 60 for now, will get 40 to 60 mor net month
1. “The difficult we do now the impossible takes just a little longer”
2. “CAN DO”
2. “CAN DO”
- Cm1green
- Posts: 54
- Joined: Wed Nov 15, 2017 1:13 pm
- Location: Colorado Springs, CO
- Contact:
Re: FIXIN TO BE A SHILOH OWNER
Has any of ya’ll ever powder coated your bullets? I see where people are doing bullets with powder coating to keep down fowling. Wonder if it is even worth the effort?
1. “The difficult we do now the impossible takes just a little longer”
2. “CAN DO”
2. “CAN DO”
- Cm1green
- Posts: 54
- Joined: Wed Nov 15, 2017 1:13 pm
- Location: Colorado Springs, CO
- Contact:
Re: FIXIN TO BE A SHILOH OWNER
Has any of ya’ll ever powder coated your bullets? I see where people are doing bullets with powder coating to keep down fowling. Wonder if it is even worth the effort?
1. “The difficult we do now the impossible takes just a little longer”
2. “CAN DO”
2. “CAN DO”
- Cm1green
- Posts: 54
- Joined: Wed Nov 15, 2017 1:13 pm
- Location: Colorado Springs, CO
- Contact:
Re: FIXIN TO BE A SHILOH OWNER
I have a new question for folks. I have 3 different presses for reloading but it seams, now I have not started or even tried to load a case yet. I put a shell holder in 2 of my presses and put a 45-2 7/8 case in the shell holder and I don’t have much space to work ie. placing bullet in case or even crimping and looks like not enough room once dies go in. What would be best reasonable press out there for doing these large cases?
1. “The difficult we do now the impossible takes just a little longer”
2. “CAN DO”
2. “CAN DO”
- Lumpy Grits
- Posts: 7686
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: FIXIN TO BE A SHILOH OWNER
Look at Redding and RCBS.
G.
G.
"Hav'n you along, is like loose'n two good men"
- Don McDowell
- Posts: 7653
- Joined: Thu Nov 29, 2007 2:04 pm
- Location: Ft. Laramie Wy
- Contact:
-
- Posts: 339
- Joined: Thu Aug 20, 2015 5:09 pm
- Location: Payson Arizona
- Contact:
Re: FIXIN TO BE A SHILOH OWNER
X2Don McDowell wrote:Redding T7 works well.
Dennis
Experience trumps intelligence every time.
- Cm1green
- Posts: 54
- Joined: Wed Nov 15, 2017 1:13 pm
- Location: Colorado Springs, CO
- Contact:
Re: FIXIN TO BE A SHILOH OWNER
Thanks on the presses all. I also wonder what folks are using for case trimmers on these long cases?
1. “The difficult we do now the impossible takes just a little longer”
2. “CAN DO”
2. “CAN DO”